{"id":9382,"date":"2024-01-19T01:00:00","date_gmt":"2024-01-19T01:00:00","guid":{"rendered":"https:\/\/uplastech.com\/formed-tray-print-registration-lidding-seal\/"},"modified":"2026-11-08T08:12:51","modified_gmt":"2026-11-08T08:12:51","slug":"formed-tray-print-registration-lidding-seal","status":"publish","type":"post","link":"https:\/\/uplastech.com\/tr\/formed-tray-print-registration-lidding-seal\/","title":{"rendered":"Print Registration: Keeping Ink Out of the Tray Seal Band"},"content":{"rendered":"<style>\n.upl-blog{font-size:17px;line-height:1.78;color:#1f2937}\n.upl-blog p{margin:0 0 18px}\n.upl-blog h2{font-size:26px;line-height:1.3;color:#0b2b33;margin:46px 0 14px;font-weight:700;letter-spacing:-.015em}\n.upl-blog h3{font-size:19.5px;color:#0d3b47;margin:28px 0 10px;font-weight:700}\n.upl-blog ul,.upl-blog ol{margin:0 0 20px;padding-left:22px}\n.upl-blog li{margin:0 0 9px}\n.upl-blog figure{margin:0 0 34px}\n.upl-blog figure img{width:100%;height:auto;display:block;border-radius:10px}\n.upl-blog figcaption{font-size:13px;color:#6b7280;margin-top:10px;line-height:1.5}\n.upl-blog .toc{background:none;border:0;border-radius:0;padding:0;margin:0 0 34px}\n.upl-blog .toc .lwptoc{margin:0}\n.upl-blog .toc h4{margin:0 0 10px;font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#0d5563}\n.upl-blog .toc ol{margin:0;padding-left:18px;font-size:14.5px}\n.upl-blog .toc li{margin-bottom:6px}\n.upl-blog table{width:100%;border-collapse:collapse;font-size:14.5px;margin:0 0 10px}\n.upl-blog th{background:#0d3b47;color:#fff;text-align:left;padding:11px 13px;font-weight:600;font-size:13.5px;border:0}\n.upl-blog td{padding:11px 13px;border:0;border-bottom:1px solid #e8ebed;vertical-align:top}\n.upl-blog tbody tr:nth-child(even){background:#fafbfc}\n.upl-blog .tablecap{font-size:12.5px;color:#6b7280;margin:0 0 30px}\n.upl-blog .myth{background:#fff8ef;border:1px solid #f6ddbd;border-radius:8px;padding:16px 20px;margin:0 0 26px;font-size:15.5px}\n.upl-blog .myth b{color:#a85c10}\n.upl-blog .callout{background:#f2f8f9;border-radius:8px;padding:18px 22px;margin:0 0 26px;font-size:15.5px;border-left:3px solid #14707f}\n.upl-blog .faq h3{border-top:1px solid #eceff1;padding-top:22px;margin-top:0;font-size:18px}\n.upl-blog .faq h3:first-of-type{border-top:0;padding-top:0}\n.upl-blog .cta{background:linear-gradient(135deg,#0b2b33,#0d5563);color:#fff;border-radius:12px;padding:34px;margin:48px 0 30px}\n.upl-blog .cta h2,.upl-blog .cta .cta-h{color:#fff;margin:0 0 10px;font-size:24px;font-weight:700;line-height:1.3}\n.upl-blog .cta p{color:#c9dee3;margin:0 0 20px;font-size:16px}\n.upl-blog .btn{display:inline-block;background:#e07a1f;color:#fff;text-decoration:none;font-weight:700;padding:13px 26px;border-radius:8px;font-size:15.5px}\n.upl-blog .rel{border-top:1px solid #e8ebed;margin-top:40px;padding-top:26px}\n.upl-blog .rel h4{font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#6b7280;margin:0 0 14px}\n.upl-blog .rel ul{list-style:none;padding:0;margin:0}\n.upl-blog .rel li{padding:11px 0;border-bottom:1px dashed #e8ebed}\n.upl-blog .rel a{text-decoration:none;font-weight:600;font-size:15.5px}\n\/* ==UPL-CONVERSION-MODULES-START== 2024 problem-solving \/ lead-gen blocks *\/\n.upl-blog .mod-h{font-size:12.5px;letter-spacing:.12em;text-transform:uppercase;font-weight:700;color:#0d5563;margin:0 0 12px}\n.upl-blog .problem{background:#fff8f3;border:1px solid #f3ddc9;border-left:4px solid #e07a1f;border-radius:10px;padding:22px 26px;margin:0 0 32px;font-size:16px}\n.upl-blog .problem p{margin:0 0 10px}\n.upl-blog .problem p:last-child{margin-bottom:0}\n.upl-blog .problem .mod-h{color:#a85c10}\n.upl-blog .problem .problem-promise{font-weight:700;color:#0b2b33}\n.upl-blog .steps{background:#f7fafb;border:1px solid #e1ebee;border-radius:10px;padding:22px 26px;margin:0 0 28px}\n.upl-blog .steps ol{list-style:none;counter-reset:uplst;margin:0;padding:0}\n.upl-blog .steps li{counter-increment:uplst;position:relative;padding:0 0 16px 42px;margin:0;font-size:15.5px}\n.upl-blog .steps li:last-child{padding-bottom:0}\n.upl-blog .steps li::before{content:counter(uplst);position:absolute;left:0;top:2px;width:26px;height:26px;border-radius:50%;background:#0d5563;color:#fff;font-size:13px;font-weight:700;line-height:26px;text-align:center}\n.upl-blog table.spec th{background:#14707f}\n.upl-blog .conv{background:#eef6f7;border:1px solid #cfe4e8;border-radius:10px;padding:24px 26px;margin:32px 0}\n.upl-blog .conv p{margin:0 0 12px;font-size:15.5px}\n.upl-blog .conv .conv-lbl{font-weight:700;color:#0b2b33;margin:16px 0 8px}\n.upl-blog ul.conv-need{list-style:none;padding:0;margin:0 0 20px;display:grid;grid-template-columns:1fr 1fr;gap:6px 18px}\n.upl-blog ul.conv-need li{position:relative;padding-left:20px;margin:0;font-size:14.5px}\n.upl-blog ul.conv-need li::before{content:\"\";position:absolute;left:0;top:9px;width:9px;height:9px;border:2px solid #14707f;border-radius:2px}\n.upl-blog .conv-btn{display:inline-block;background:#0d5563;color:#fff;text-decoration:none;font-weight:700;padding:11px 22px;border-radius:7px;font-size:15px}\n.upl-blog .checklist{background:#fbfcfd;border:1px solid #e3e9ec;border-radius:10px;padding:24px 26px;margin:36px 0}\n.upl-blog .checklist ul{list-style:none;padding:0;margin:0 0 12px}\n.upl-blog .checklist li{position:relative;padding-left:28px;margin:0 0 10px;font-size:15.5px}\n.upl-blog .checklist li::before{content:\"\";position:absolute;left:0;top:7px;width:14px;height:14px;border:2px solid #0d5563;border-radius:3px}\n.upl-blog .cl-note{font-size:13.5px;color:#6b7280;margin:0}\n.upl-blog .cta .cta-lbl{color:#c9dee3;font-weight:700;margin:0 0 8px;font-size:14.5px}\n.upl-blog ul.cta-need{list-style:none;padding:0;margin:0 0 22px;display:grid;grid-template-columns:1fr 1fr;gap:4px 18px}\n.upl-blog ul.cta-need li{color:#e4f0f2;font-size:14.5px;padding-left:18px;position:relative;margin:0}\n.upl-blog ul.cta-need li::before{content:\"\\2713\";position:absolute;left:0;color:#e07a1f;font-weight:700}\n\/* ==UPL-CONVERSION-MODULES-END== *\/\n@media(max-width:640px){.upl-blog h2{font-size:22px}.upl-blog table{font-size:13px}.upl-blog .cta{padding:24px}.upl-blog ul.conv-need,.upl-blog ul.cta-need{grid-template-columns:1fr}.upl-blog .problem,.upl-blog .steps,.upl-blog .conv,.upl-blog .checklist{padding:18px}}\n\/* \u5355\u7bc7\u9875\u9690\u85cf WhatsApp \u95ee\u5019\u5361\uff0c\u53ea\u4fdd\u7559\u5706\u5f62\u6c14\u6ce1\uff0c\u907f\u514d\u906e\u6321\u4fa7\u680f\u8be2\u76d8\u63d0\u4ea4\u6309\u94ae\u3002\n   \u6ce8\u610f\uff1aClick to Chat \u7684\u70b9\u51fb\u903b\u8f91\u662f\u300c\u95ee\u5019\u5361\u5143\u7d20\u5b58\u5728\u5c31\u4e0d\u8df3\u8f6c\u300d\uff0c\u53ea\u9760 CSS \u9690\u85cf\u4f1a\u8ba9\u6c14\u6ce1\u53d8\u6210\u6b7b\u94fe\u63a5\u3002\n   Code Snippets #9\u300cUPL single post: WhatsApp bubble jumps straight to chat\u300d\u8d1f\u8d23\u628a\u8be5\u8282\u70b9\u4ece DOM \u79fb\u9664\uff0c\n   \u4e0b\u9762\u8fd9\u6761 CSS \u53ea\u662f\u79fb\u9664\u524d\u7684\u89c6\u89c9\u515c\u5e95\u3002\u5220 #9 \u524d\u5fc5\u987b\u5148\u5220\u8fd9\u6761\u89c4\u5219\u3002 *\/\nbody.single-post .ht_ctc_chat_greetings_box{display:none !important}\n<\/style>\n<div class=\"upl-blog\">\n<figure>\n<img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/uplastech.com\/wp-content\/uploads\/2026\/11\/2024-formed-tray-print-registration-lidding-seal-hero.jpg\" alt=\"Real thermoformed plastic tray and packaging components\" width=\"1536\" height=\"909\"><figcaption>Real thermoforming production context. Photo: Pexels.<\/figcaption><\/figure>\n<div class=\"problem\">\n<p class=\"mod-h\">The problem<\/p>\n<p><b>Symptom.<\/b> A lidding line rejects a printed tray run because ink sits 1.2 mm inside the 4 mm seal band on one edge, while the printer insists the artwork was approved to the cold sheet drawing.<\/p>\n<p><b>What it costs.<\/b> A 220 000-pack batch is held because ink in the seal land weakens the bond, and the printer, former and packer each blame a different stage of the print-to-form sequence.<\/p>\n<p class=\"problem-promise\">This guide shows how to compute thermal expansion of the printed web, set registration and jaw clearance, and write a print clause into the tray drawing.<\/p>\n<\/div>\n<div class=\"toc\"><\/div>\n<h2 id=\"ink-in-the-seal-band-is-an-expansion-fault-not-a-print-fault\">Ink in the seal band is an expansion fault, not a print fault<\/h2>\n<p>Printed PET expands in the forming oven. A 300 mm web heated from 23 \u00b0C to 123 \u00b0C grows by 0.00007 \u00d7 300 \u00d7 100 = 2.1 mm, so artwork referenced to the cold sheet lands about 2 mm off the formed datum.<\/p>\n<table>\n<thead>\n<tr>\n<th>What the packer sees<\/th>\n<th>What is physically happening<\/th>\n<th>First measurement<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Ink inside the seal band on one edge<\/td>\n<td>Web expanded and the print shifted to the datum<\/td>\n<td>Print offset against the datum mark at five points<\/td>\n<\/tr>\n<tr>\n<td>Band narrow on the opposite edge<\/td>\n<td>Whole web displaced, not a local print fault<\/td>\n<td>Ink clearance on all four edges<\/td>\n<\/tr>\n<tr>\n<td>Drift grows through the reel<\/td>\n<td>Oven temperature or slip changed mid-run<\/td>\n<td>Offset at reel start, middle and end<\/td>\n<\/tr>\n<tr>\n<td>Good cold, bad after forming<\/td>\n<td>Artwork referenced to the unheated sheet<\/td>\n<td>Drift before and after the forming oven<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 1 - Classifying a registration fault before changing platen heat<\/p>\n<div class=\"callout\">Record which of these you are actually seeing before changing any setting. Two faults can look identical on the line and need opposite corrections.<\/div>\n<p><!-- upl-conv-v1 quickcta --><\/p>\n<div class=\"quickcta\">\n<p class=\"mod-h\">Need a fixed price for this formed tray?<\/p>\n<p>Send the tray drawing, sheet gauge and annual volume. We will review draft, trim and material, then quote a production tool with a written line-acceptance test.<\/p>\n<p class=\"quickcta-act\"><a class=\"quickcta-btn\" href=\"https:\/\/uplastech.com\/vacuum-forming\/\">Get a thermoforming quotation<\/a><a class=\"quickcta-alt\" href=\"mailto:john@uplastech.com\">Email john@uplastech.com<\/a><a class=\"quickcta-alt\" href=\"https:\/\/wa.me\/8617717529949\">WhatsApp<\/a><\/p>\n<\/div>\n<h2 id=\"compute-the-web-growth-before-re-registering-the-artwork\">Compute the web growth before re-registering the artwork<\/h2>\n<p>Measure print-to-datum drift at five points across the formed web and read the narrowest ink clearance. A representative uncompensated run drifted 2.1 mm at 123 \u00b0C and put ink 1.2 mm into the 4 mm seal band.<\/p>\n<div class=\"steps\">\n<p class=\"mod-h\">A five-step diagnostic sequence<\/p>\n<ol>\n<li><b>Mark a datum.<\/b><br \/>Print a registration datum mark on the web and reference the artwork to it.<\/li>\n<li><b>Compute the growth.<\/b><br \/>Use 0.00007 \u00d7 300 \u00d7 100 = 2.1 mm for the 23 \u00b0C to 123 \u00b0C oven rise.<\/li>\n<li><b>Compensate the artwork.<\/b><br \/>Pre-shrink the print by the computed 2.1 mm across the 300 mm width.<\/li>\n<li><b>Measure four edges.<\/b><br \/>Read ink clearance on all four edges of 30 formed trays under D65 light.<\/li>\n<li><b>Qualify three lots.<\/b><br \/>Repeat on 200 packs from three print lots and attach the record to first-off.<\/li>\n<\/ol>\n<\/div>\n<p>The chart below is a typical result from that measurement step. Use it to separate a design limit from a setting that can still be recovered.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/uplastech.com\/wp-content\/uploads\/2026\/11\/formed-tray-print-registration-lidding-seal-chart.jpg\" alt=\"Print Registration: Keeping Ink Out of the Tray Seal Band: calculated response trend and an illustrative root-cause split\" width=\"1536\" height=\"909\"><figcaption>Figure 1 \u2014 Calculated response trend and an illustrative root-cause split. Values are engineering guidance for diagnosis, not a measured survey; confirm them on your own line before changing a drawing or a specification.<\/figcaption><\/figure>\n<h2 id=\"registration-jaw-clearance-and-seal-band-to-specify\">Registration, jaw clearance and seal band to specify<\/h2>\n<p>Three numbers hold the band: registration within +\/- 0.5 mm of a printed datum, a 1.5 mm ink-free seal band, and 1.0 mm seal-jaw clearance. Shrink-compensated artwork holds drift to 0.3 mm at 123 \u00b0C.<\/p>\n<table class=\"spec\">\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>Typical target<\/th>\n<th>What goes wrong outside it<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Print registration to datum<\/td>\n<td>+\/- 0.5 mm<\/td>\n<td>A 2.1 mm drift puts ink in the seal band<\/td>\n<\/tr>\n<tr>\n<td>Ink-free seal band<\/td>\n<td>\u2265 1.5 mm on all four edges<\/td>\n<td>Ink in the land weakens the lidding bond<\/td>\n<\/tr>\n<tr>\n<td>Seal-jaw clearance<\/td>\n<td>\u2265 1.0 mm<\/td>\n<td>A tight jaw crushes the printed land<\/td>\n<\/tr>\n<tr>\n<td>Artwork compensation<\/td>\n<td>2.1 mm at 300 mm \/ 100 \u00b0C<\/td>\n<td>Uncompensated artwork lands off the formed datum<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 2 - Registration parameters to write on the tray drawing<\/p>\n<h2 id=\"variables-that-drift-the-print-after-a-reel-or-oven-change\">Variables that drift the print after a reel or oven change<\/h2>\n<p>Drift returns as the sequence changes. Printing before the sheet is dried, an oven 20 \u00b0C hotter, a reel with 3 % different slip, or forming before an anneal step all move the ink relative to the formed flange.<\/p>\n<table>\n<thead>\n<tr>\n<th>Process variable<\/th>\n<th>Effect on registration<\/th>\n<th>Practical control<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Oven 20 \u00b0C hotter<\/td>\n<td>Web grows and the print drifts further<\/td>\n<td>Hold oven temperature and log per shift<\/td>\n<\/tr>\n<tr>\n<td>Artwork referenced to cold sheet<\/td>\n<td>2.1 mm of growth lands in the seal band<\/td>\n<td>Apply shrink compensation to the artwork<\/td>\n<\/tr>\n<tr>\n<td>Print-to-form order changed<\/td>\n<td>Ink cures or the sheet relaxes differently<\/td>\n<td>Lock the sequence in the process sheet<\/td>\n<\/tr>\n<tr>\n<td>Reel with 3 % different slip<\/td>\n<td>Index pitch no longer matches the print<\/td>\n<td>Re-set registration per incoming print lot<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 3 - Variables that drift the print after sign-off<\/p>\n<div class=\"myth\"><b>Myth:<\/b> \"A process adjustment will fix it.\" Once a design limit is reached, more tuning only adds cost and variation. Confirm the limit with a measurement, then change the drawing or the specification.<\/div>\n<h2 id=\"a-print-registration-clause-for-the-tray-drawing\">A print-registration clause for the tray drawing<\/h2>\n<p>A peel test cannot see where the ink sits. Add a clause: registration within +\/- 0.5 mm of the printed datum, a 1.5 mm ink-free seal band on all four edges, verified on 200 packs from three print lots.<\/p>\n<div class=\"conv\">\n<p class=\"mod-h\">Want the tray checked against your line?<\/p>\n<p>Send us the tray drawing and the line conditions. We will flag the geometry and material choices that cause jams, and quote a tool with an acceptance test.<\/p>\n<p class=\"conv-lbl\">What to send us<\/p>\n<ul class=\"conv-need\">\n<li>Tray drawing with draft and radii<\/li>\n<li>Sheet grade and gauge<\/li>\n<li>Stack depth and line speed<\/li>\n<li>Drawings of the magazine or denester<\/li>\n<\/ul>\n<p><a class=\"conv-btn\" href=\"\/vacuum-forming\/\">Send the tray drawing<\/a>\n<\/div>\n<h2 id=\"costing-shrink-compensated-artwork-against-a-held-pack-batch\">Costing shrink-compensated artwork against a held pack batch<\/h2>\n<p>Shrink-compensated artwork, a printed datum mark and a 1.0 mm jaw clearance cost roughly \u00a31 500-3 000 but hold the 1.5 mm band. One held 220 000-pack batch costs more than the artwork across the order.<\/p>\n<div class=\"callout\">Validate one change at a time and keep the measurement record. A supplier discussion backed by data is resolved in days, not weeks.<\/div>\n<div class=\"checklist\">\n<p class=\"mod-h\">Before you sign off this thermoformed tool<\/p>\n<ul>\n<li>A registration tolerance of +\/- 0.5 mm to a printed datum is stated on the tray drawing<\/li>\n<li>A minimum 1.5 mm ink-free seal band on all four edges is written into acceptance<\/li>\n<li>A 1.0 mm seal-jaw clearance and the print-to-form sequence are specified<\/li>\n<li>Artwork carries shrink compensation for the 2.1 mm oven growth<\/li>\n<li>The print test covers 200 packs from three print lots, not a single first-off tray<\/li>\n<\/ul>\n<p class=\"cl-note\">A tray that looks right in the carton can still stop a filling line. Test the stack, not a single part.<\/p>\n<\/div>\n<div class=\"faq\">\n<h3>Why does ink land in the seal band?<\/h3>\n<p>The printed web expands in the oven. A 300 mm width heated from 23 \u00b0C to 123 \u00b0C grows by 0.00007 \u00d7 300 \u00d7 100 = 2.1 mm, so artwork drawn to the cold sheet shifts into the seal land after forming.<\/p>\n<h3>Is the printer or the former at fault?<\/h3>\n<p>Measure drift before and after the oven. A 2.1 mm shift that appears only after heating is expansion, not a print error. Compensate the artwork rather than re-registering the press.<\/p>\n<h3>Will a wider seal band help?<\/h3>\n<p>It gives the ink more room but consumes printable area and does not fix the drift. Hold the +\/- 0.5 mm registration and the 1.5 mm ink-free band on a 4 mm land instead.<\/p>\n<h3>How is shrink compensation calculated?<\/h3>\n<p>Multiply the web width, the coefficient 0.00007 \/\u00b0C and the oven temperature rise. For 300 mm and a 100 \u00b0C rise the compensation is 2.1 mm, which holds drift near 0.3 mm.<\/p>\n<h3>Does the print-to-form order matter?<\/h3>\n<p>Yes. Print, dry and anneal the sheet before forming, and lock that sequence in the process sheet. Printing on a wet sheet or forming before an anneal step moves the ink relative to the flange.<\/p>\n<h3>What should the print clause say?<\/h3>\n<p>Registration within +\/- 0.5 mm of a printed datum and a 1.5 mm ink-free seal band on all four edges, verified on 200 packs from three print lots, with the compensation value on the drawing.<\/p>\n<\/div>\n<div class=\"cta\">\n<p class=\"cta-h\">Get a tray that runs on your filling line<\/p>\n<p>Send us the tray drawing or a sample stack. We will review draft, trim and material, then quote a production tool with a measurable line-acceptance test written into it.<\/p>\n<p class=\"cta-lbl\">To get an accurate quote, send:<\/p>\n<ul class=\"cta-need\">\n<li>Tray drawing or sample stack<\/li>\n<li>Sheet material and gauge<\/li>\n<li>Line speed and denesting method<\/li>\n<li>Annual volume and target unit price<\/li>\n<\/ul>\n<p><a class=\"btn\" href=\"\/vacuum-forming\/\">Request a tool and tray quotation<\/a><br \/>\n<!-- upl-conv-v1 contact --><\/p>\n<div class=\"contactbar\">\n<p class=\"contactbar-h\">Prefer to talk it through first?<\/p>\n<p>Email <a href=\"mailto:john@uplastech.com\">john@uplastech.com<\/a> or message us on <a href=\"https:\/\/wa.me\/8617717529949\">WhatsApp +86 177 1752 9949<\/a>. Send a drawing, a sample or a specification and an engineer will reply.<\/p>\n<\/div>\n<p><!-- upl-conv-v1 trust --><\/p>\n<div class=\"trust\">\n<p class=\"trust-h\">Why buyers work with Uplastech<\/p>\n<p>ISO 9001, ISO 14001 and ISO 45001 certified. Founded in 2016, with injection moulding lines in Shanghai and an extrusion plant in Jiangsu. Moulding machines from 90T to 1100T and a maximum shot weight of 5100 g. Samples and a written quotation are available on request.<\/p>\n<\/div>\n<\/div>\n<div class=\"rel\">\n<h4>Continue reading<\/h4>\n<ul>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-sheet-thickness-tolerance\/\">Thermoforming sheet thickness tolerance<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-stacking-nesting\/\">Thermoforming stacking and nesting<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-tolerances\/\">Thermoforming tolerances<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-trimming-methods\/\">Thermoforming trimming methods<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/effects-of-manufacturing-defects-on-thermoformed-packaging-quality\/\">Manufacturing defects in thermoformed packaging<\/a><\/li>\n<\/ul>\n<p><!-- upl-conv-v1 service --><\/p>\n<p class=\"rel-svc\">Ready to specify? See our <a href=\"https:\/\/uplastech.com\/vacuum-forming\/\">vacuum forming and thermoforming services<\/a> or <a href=\"mailto:john@uplastech.com\">request a written quotation<\/a>.<\/p>\n<\/div>\n<\/div>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Why does ink land in the seal band?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"The printed web expands in the oven. A 300 mm width heated from 23 \u00b0C to 123 \u00b0C grows by 0.00007 \u00d7 300 \u00d7 100 = 2.1 mm, so artwork drawn to the cold sheet shifts into the seal land after forming.\"}}, {\"@type\": \"Question\", \"name\": \"Is the printer or the former at fault?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Measure drift before and after the oven. A 2.1 mm shift that appears only after heating is expansion, not a print error. Compensate the artwork rather than re-registering the press.\"}}, {\"@type\": \"Question\", \"name\": \"Will a wider seal band help?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It gives the ink more room but consumes printable area and does not fix the drift. Hold the +\/- 0.5 mm registration and the 1.5 mm ink-free band on a 4 mm land instead.\"}}, {\"@type\": \"Question\", \"name\": \"How is shrink compensation calculated?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Multiply the web width, the coefficient 0.00007 \/\u00b0C and the oven temperature rise. For 300 mm and a 100 \u00b0C rise the compensation is 2.1 mm, which holds drift near 0.3 mm.\"}}, {\"@type\": \"Question\", \"name\": \"Does the print-to-form order matter?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Yes. Print, dry and anneal the sheet before forming, and lock that sequence in the process sheet. Printing on a wet sheet or forming before an anneal step moves the ink relative to the flange.\"}}, {\"@type\": \"Question\", \"name\": \"What should the print clause say?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Registration within +\/- 0.5 mm of a printed datum and a 1.5 mm ink-free seal band on all four edges, verified on 200 packs from three print lots, with the compensation value on the drawing.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>This guide shows how to compute thermal expansion of the printed web, set registration and jaw clearance, and write a print clause into the tray drawing.<\/p>","protected":false},"author":1,"featured_media":9380,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[29],"tags":[],"class_list":["post-9382","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-vacuum-forming"],"meta_box":{"post-to-quiz_to":[]},"_links":{"self":[{"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/posts\/9382","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/comments?post=9382"}],"version-history":[{"count":1,"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/posts\/9382\/revisions"}],"predecessor-version":[{"id":9934,"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/posts\/9382\/revisions\/9934"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/media\/9380"}],"wp:attachment":[{"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/media?parent=9382"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/categories?post=9382"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/uplastech.com\/tr\/wp-json\/wp\/v2\/tags?post=9382"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}