{"id":7501,"date":"2026-10-25T11:12:15","date_gmt":"2026-10-25T11:12:15","guid":{"rendered":"https:\/\/uplastech.com\/acrylic-rod-specification-guide\/"},"modified":"2026-10-26T07:41:48","modified_gmt":"2026-10-26T07:41:48","slug":"acrylic-rod-specification-guide","status":"publish","type":"post","link":"https:\/\/uplastech.com\/nl\/acrylic-rod-specification-guide\/","title":{"rendered":"Acrylic Rod Sizes, Tolerances and Straightness"},"content":{"rendered":"<style>\n.upl-blog{font-size:17px;line-height:1.78;color:#1f2937}\n.upl-blog p{margin:0 0 18px}\n.upl-blog h2{font-size:26px;line-height:1.3;color:#0b2b33;margin:46px 0 14px;font-weight:700;letter-spacing:-.015em}\n.upl-blog h3{font-size:19.5px;color:#0d3b47;margin:28px 0 10px;font-weight:700}\n.upl-blog ul,.upl-blog ol{margin:0 0 20px;padding-left:22px}\n.upl-blog li{margin:0 0 9px}\n.upl-blog figure{margin:0 0 34px}\n.upl-blog figure img{width:100%;height:auto;display:block;border-radius:10px}\n.upl-blog figcaption{font-size:13px;color:#6b7280;margin-top:10px;line-height:1.5}\n.upl-blog .toc{background:none;border:0;border-radius:0;padding:0;margin:0 0 34px}\n.upl-blog .toc .lwptoc{margin:0}\n.upl-blog .toc h4{margin:0 0 10px;font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#0d5563}\n.upl-blog .toc ol{margin:0;padding-left:18px;font-size:14.5px}\n.upl-blog .toc li{margin-bottom:6px}\n.upl-blog table{width:100%;border-collapse:collapse;font-size:14.5px;margin:0 0 10px}\n.upl-blog th{background:#0d3b47;color:#fff;text-align:left;padding:11px 13px;font-weight:600;font-size:13.5px;border:0}\n.upl-blog td{padding:11px 13px;border:0;border-bottom:1px solid #e8ebed;vertical-align:top}\n.upl-blog tbody tr:nth-child(even){background:#fafbfc}\n.upl-blog .tablecap{font-size:12.5px;color:#6b7280;margin:0 0 30px}\n.upl-blog .myth{background:#fff8ef;border:1px solid #f6ddbd;border-radius:8px;padding:16px 20px;margin:0 0 26px;font-size:15.5px}\n.upl-blog .myth b{color:#a85c10}\n.upl-blog .callout{background:#f2f8f9;border-radius:8px;padding:18px 22px;margin:0 0 26px;font-size:15.5px;border-left:3px solid #14707f}\n.upl-blog .faq h3{border-top:1px solid #eceff1;padding-top:22px;margin-top:0;font-size:18px}\n.upl-blog .faq h3:first-of-type{border-top:0;padding-top:0}\n.upl-blog .cta{background:linear-gradient(135deg,#0b2b33,#0d5563);color:#fff;border-radius:12px;padding:34px;margin:48px 0 30px}\n.upl-blog .cta h2,.upl-blog .cta .cta-h{color:#fff;margin:0 0 10px;font-size:24px;font-weight:700;line-height:1.3}\n.upl-blog .cta p{color:#c9dee3;margin:0 0 20px;font-size:16px}\n.upl-blog .btn{display:inline-block;background:#e07a1f;color:#fff;text-decoration:none;font-weight:700;padding:13px 26px;border-radius:8px;font-size:15.5px}\n.upl-blog .rel{border-top:1px solid #e8ebed;margin-top:40px;padding-top:26px}\n.upl-blog .rel h4{font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#6b7280;margin:0 0 14px}\n.upl-blog .rel ul{list-style:none;padding:0;margin:0}\n.upl-blog .rel li{padding:11px 0;border-bottom:1px dashed #e8ebed}\n.upl-blog .rel a{text-decoration:none;font-weight:600;font-size:15.5px}\n@media(max-width:640px){.upl-blog h2{font-size:22px}.upl-blog table{font-size:13px}.upl-blog .cta{padding:24px}}\n\/* \u5355\u7bc7\u9875\u9690\u85cf WhatsApp \u81ea\u52a8\u5c55\u5f00\u7684\u95ee\u5019\u5361\uff0c\u53ea\u4fdd\u7559\u5706\u5f62\u6c14\u6ce1\uff0c\u907f\u514d\u906e\u6321\u4fa7\u680f\u8be2\u76d8\u63d0\u4ea4\u6309\u94ae *\/\nbody.single-post .ht_ctc_chat_greetings_box{display:none !important}\n<\/style>\n<div class=\"upl-blog\">\n<figure>\n<img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/uplastech.com\/wp-content\/uploads\/2026\/10\/acrylic-rod-straightness-check.jpg\" alt=\"Dial indicator checking the straightness of a clear acrylic rod on a granite surface plate\" width=\"1536\" height=\"909\"><figcaption>Straightness checked with a dial indicator on a granite plate \u2014 read in mm per metre<\/figcaption><\/figure>\n<div class=\"toc\"><\/div>\n<h2 id=\"range\">What sizes are actually available<\/h2>\n<p>Acrylic rod is nominally available from about 2 mm to 200 mm, but the range is not uniform across processes, and availability in a given diameter and colour is a stock question rather than a capability question.<\/p>\n<table>\n<thead>\n<tr>\n<th>Diameter<\/th>\n<th>Ge\u00ebxtrudeerd<\/th>\n<th>Cast<\/th>\n<th>Opmerkingen<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>2\u201310 mm<\/td>\n<td>Standard, 1 mm increments<\/td>\n<td>Available, made to order<\/td>\n<td>Extruded is the economical route at this size<\/td>\n<\/tr>\n<tr>\n<td>10\u201330 mm<\/td>\n<td>Standard, 1\u20132 mm increments<\/td>\n<td>Standard, 1\u20132 mm increments<\/td>\n<td>The overlap zone \u2014 choose on tolerance and volume, not availability<\/td>\n<\/tr>\n<tr>\n<td>30\u201360 mm<\/td>\n<td>Available, fewer sizes<\/td>\n<td>Standard<\/td>\n<td>Extruded tolerance starts to loosen; cooling becomes harder<\/td>\n<\/tr>\n<tr>\n<td>60\u2013120 mm<\/td>\n<td>Not practical<\/td>\n<td>Standard, 5\u201310 mm increments<\/td>\n<td>Cast only<\/td>\n<\/tr>\n<tr>\n<td>120\u2013200 mm+<\/td>\n<td>Geen<\/td>\n<td>Made to order<\/td>\n<td>Long cure cycles; expect lead time measured in weeks<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">\"Standard\" means commonly held or routinely produced. Non-standard diameters are possible but usually carry a minimum quantity, because a cast mould tube or an extrusion die is dedicated to that size.<\/p>\n<p>Two practical points. First, an odd diameter like 17.5 mm will cost more than 18 mm in almost every case, because it is not a size anyone holds tooling for. Second, if your drawing calls for a nominal that nobody makes, the supplier will either machine it from the next size up \u2014 which changes the price entirely \u2014 or quietly supply the nearest standard and hope you do not measure.<\/p>\n<h2 id=\"diameter\">Diameter tolerance: how to write it<\/h2>\n<p>This is where most acrylic rod disputes start, because \"20 mm\" is not a specification and the two processes hold very different tolerances.<\/p>\n<table>\n<thead>\n<tr>\n<th>Diameter range<\/th>\n<th>Extruded \u2014 achievable<\/th>\n<th>Cast \u2014 achievable<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>2\u201310 mm<\/td>\n<td>\u00b10.1 mm<\/td>\n<td>\u00b10.3 mm<\/td>\n<\/tr>\n<tr>\n<td>10\u201330 mm<\/td>\n<td>\u00b10.2 mm<\/td>\n<td>\u00b10.5 mm, or \u00b12 %<\/td>\n<\/tr>\n<tr>\n<td>30\u201360 mm<\/td>\n<td>\u00b10.3 mm<\/td>\n<td>\u00b11.0 mm, or \u00b12 %<\/td>\n<\/tr>\n<tr>\n<td>60\u2013120 mm<\/td>\n<td>\u2014<\/td>\n<td>\u00b11.5 mm, or \u00b12 %<\/td>\n<\/tr>\n<tr>\n<td>120 mm+<\/td>\n<td>\u2014<\/td>\n<td>\u00b12.0 mm, or \u00b12 %<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Indicative for standard commercial production. Tighter figures are negotiable on extruded rod with in-line gauging; cast rod cannot be brought to extruded tolerance because the mould tube, not a die, sets the size.<\/p>\n<p><strong>How to write it.<\/strong> Give the nominal and a symmetric tolerance \u2014 <em>20.0 \u00b1 0.2 mm<\/em> \u2014 rather than a limit range, unless you specifically need an asymmetric band. State the measurement temperature if the part is large, and state how many points along the length are measured. A tolerance without a sampling rule is not enforceable.<\/p>\n<p><strong>The trap.<\/strong> A drawing that specifies \u00b10.1 mm on a 40 mm cast rod is asking for something the process cannot do. The supplier has three options: decline, machine the rod down from a larger size (expensive), or accept the order and ship out-of-tolerance. Only the first two are honest, and the second changes the price significantly. If you need that tolerance, say so at the quoting stage.<\/p>\n<h2 id=\"ovality\">Ovality \u2014 the dimension nobody specifies<\/h2>\n<p>Ovality is the difference between the largest and smallest diameter measured across the same cross-section, usually expressed as a percentage of nominal. It is almost never on a drawing and it is the reason a rod that \"measures 20 mm\" will not fit a 20 mm hole.<\/p>\n<ul>\n<li><strong>Extruded:<\/strong> typically 1\u20132 % of diameter. On a 20 mm rod that is 0.2\u20130.4 mm \u2014 the same order as the diameter tolerance itself.<\/li>\n<li><strong>Cast:<\/strong> up to about 3 % of diameter, driven by tube roundness and cooling symmetry.<\/li>\n<\/ul>\n<p>If the rod goes into a close-fitting hole, a bearing, or a collet, specify ovality explicitly. If it is decorative, it does not matter and specifying it only adds cost.<\/p>\n<h2 id=\"straightness\">Straightness and bow<\/h2>\n<p>Straightness is expressed as maximum deviation from a straight line, in millimetres per metre of length. It is a separate requirement from diameter and it is the one most often left out.<\/p>\n<table>\n<thead>\n<tr>\n<th>Product<\/th>\n<th>Typical bow<\/th>\n<th>What drives it<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Extruded rod, standard<\/td>\n<td>1\u20132 mm\/m<\/td>\n<td>Cooling symmetry, haul-off alignment, stress relaxation<\/td>\n<\/tr>\n<tr>\n<td>Extruded rod, controlled<\/td>\n<td>1 mm\/m or better<\/td>\n<td>Balanced cooling and a stress-relief pass<\/td>\n<\/tr>\n<tr>\n<td>Cast rod<\/td>\n<td>2\u20135 mm\/m<\/td>\n<td>Tube verticality during cure, cooling symmetry<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Two things to state alongside the number. First, <strong>the length over which it is measured<\/strong> \u2014 a rod that is straight over 500 mm can be visibly bowed over 2 metres. Second, <strong>whether the rod is measured as supplied or after conditioning<\/strong>, because a rod packed while still warm can bow in the box.<\/p>\n<p>For long decorative lengths where straightness is a design feature, the practical fix is often not a tighter specification but better packing \u2014 a rigid tube or a supported crate rather than a bundle.<\/p>\n<h2 id=\"length\">Length and cut tolerance<\/h2>\n<p>Standard supply is 1000 mm or 2000 mm straight lengths; some producers offer 3000 mm in smaller diameters. Cut-to-length is normal and priced per cut.<\/p>\n<ul>\n<li><strong>Cut length tolerance:<\/strong> \u00b11 mm is standard. Tighter needs a different cut-off arrangement and is priced accordingly.<\/li>\n<li><strong>Squareness of cut:<\/strong> a saw cut is rarely perfectly square. If the rod has to butt against a surface, specify squareness or specify a machined end.<\/li>\n<li><strong>Length and temperature:<\/strong> acrylic expands roughly 0.07 mm per metre per \u00b0C. A 2 m rod measured at 30 \u00b0C in a warehouse and again at 20 \u00b0C in a lab differs by about 1.4 mm \u2014 more than the cut tolerance. State the measurement temperature for long lengths.<\/li>\n<\/ul>\n<h2 id=\"ends\">End finish<\/h2>\n<p>The end of the rod is usually specified last and matters most, because it is the face people look through.<\/p>\n<table>\n<thead>\n<tr>\n<th>Afwerking<\/th>\n<th>What it looks like<\/th>\n<th>Use it when<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td><strong>Sawn<\/strong><\/td>\n<td>Matte, with visible saw marks; light scatters<\/td>\n<td>Ends are hidden, or will be machined later<\/td>\n<\/tr>\n<tr>\n<td><strong>Machined square<\/strong><\/td>\n<td>Flat and dimensionally accurate, still slightly matte<\/td>\n<td>Ends butt against a surface or are assembled<\/td>\n<\/tr>\n<tr>\n<td><strong>Polished<\/strong><\/td>\n<td>Clear, transparent through the end face<\/td>\n<td>Visible ends, light guides, display parts<\/td>\n<\/tr>\n<tr>\n<td><strong>Flame polished<\/strong><\/td>\n<td>Very clear, slightly rounded edge<\/td>\n<td>Decorative visible ends where a soft edge is acceptable<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p>Polished ends are a separate operation and a separate line item. A quotation that says \"cut to length\" does not include them, and the difference in cost is not trivial on short lengths.<\/p>\n<h2 id=\"surface\">Surface finish and optical grade<\/h2>\n<p>Standard rod has a glossy as-produced surface \u2014 from the mould tube in casting, from the die and cooling in extrusion. Beyond that there are three grades worth distinguishing.<\/p>\n<ul>\n<li><strong>Standard:<\/strong> glossy, minor surface marks acceptable, no optical requirement. Most decorative and structural applications.<\/li>\n<li><strong>Optical:<\/strong> specified light transmission (clear PMMA is around 92 % over 3 mm), no visible internal bubbles or haze, ends polished. Light guides, lenses, display components.<\/li>\n<li><strong>Protected:<\/strong> standard or optical rod with a peelable film on the cylindrical surface, for parts that must arrive scratch-free and be handled before assembly.<\/li>\n<\/ul>\n<p>Specifying \"optical\" without defining a transmission value and a bubble limit gives the supplier nothing to work to. State the transmission, the measurement thickness, and the maximum acceptable defect with a reference sample.<\/p>\n<h2 id=\"annealing\">Annealed or unannealed<\/h2>\n<p>Annealing relieves internal stress. It matters if the rod will be machined, drilled, tapped, cemented or exposed to solvents.<\/p>\n<ul>\n<li><strong>Unannealed<\/strong> is normal for rod sold as stock and cut into decorative lengths. Cheaper, and adequate if nothing further happens to it.<\/li>\n<li><strong>Annealed<\/strong> is required before machining or solvent cementing. It costs slightly more and prevents the most common field failure in acrylic components \u2014 a crack that appears a day after assembly.<\/li>\n<\/ul>\n<p>Ask for a craze test result rather than a statement that the rod is annealed. It is a short test and it is the only objective evidence.<\/p>\n<h2 id=\"packing\">Packing and protection<\/h2>\n<p>Acrylic scratches if you look at it wrongly, and packing is where a good rod becomes a rejected rod.<\/p>\n<ul>\n<li><strong>Interleaving.<\/strong> Rods packed in direct contact rub in transit. Paper interleaf or individual sleeving prevents it.<\/li>\n<li><strong>End protection.<\/strong> Ends take the impact in a dropped carton. End caps or foam are cheap insurance on polished ends.<\/li>\n<li><strong>Support.<\/strong> Long lengths need a rigid crate or tube. A bundle strapped in the middle sags and bows.<\/li>\n<li><strong>Film.<\/strong> Peelable film on optical grades, applied clean and removed within the stated shelf life \u2014 an old film leaves adhesive residue that is worse than the scratches it prevented.<\/li>\n<\/ul>\n<h2 id=\"spec\">A specification you can copy<\/h2>\n<p>This is the level of detail that produces a quotation you can compare with another supplier's. Everything below is a decision you have to make anyway; writing it down costs nothing and prevents most disputes.<\/p>\n<table>\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>What to state<\/th>\n<th>Voorbeeld<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Materiaal<\/td>\n<td>PMMA, cast or extruded<\/td>\n<td>Cast PMMA, annealed<\/td>\n<\/tr>\n<tr>\n<td>Colour<\/td>\n<td>Reference sample, transparency, diameter for approval<\/td>\n<td>Amber, transparent, approved on 20 mm<\/td>\n<\/tr>\n<tr>\n<td>Diameter<\/td>\n<td>Nominal and symmetric tolerance<\/td>\n<td>20.0 \u00b1 0.2 mm<\/td>\n<\/tr>\n<tr>\n<td>Ovality<\/td>\n<td>% of nominal, if it matters<\/td>\n<td>\u2264 2 %<\/td>\n<\/tr>\n<tr>\n<td>Rechtheid<\/td>\n<td>mm per metre, and over what length<\/td>\n<td>\u2264 2 mm\/m over 2 m<\/td>\n<\/tr>\n<tr>\n<td>Length<\/td>\n<td>Length and cut tolerance<\/td>\n<td>1000 \u00b1 1 mm<\/td>\n<\/tr>\n<tr>\n<td>End finish<\/td>\n<td>Sawn, machined or polished<\/td>\n<td>Polished both ends<\/td>\n<\/tr>\n<tr>\n<td>Optical<\/td>\n<td>Transmission and defect limit, if applicable<\/td>\n<td>\u2265 90 % at 3 mm, no visible bubbles<\/td>\n<\/tr>\n<tr>\n<td>Stress<\/td>\n<td>Annealed, with craze test evidence<\/td>\n<td>Annealed, craze test passed<\/td>\n<\/tr>\n<tr>\n<td>Packing<\/td>\n<td>Interleaf, end protection, crate type<\/td>\n<td>Paper interleaf, foam ends, rigid crate<\/td>\n<\/tr>\n<tr>\n<td>Quantity<\/td>\n<td>Per order and per year<\/td>\n<td>500 pcs, 2000 pcs\/year<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<h2 id=\"faq\">Frequently asked questions<\/h2>\n<div class=\"faq\">\n<h3>What is the standard length of acrylic rod?<\/h3>\n<p>1000 mm and 2000 mm are the common stock lengths, with 3000 mm available in smaller diameters. Cut-to-length is standard and usually priced per cut, with a \u00b11 mm tolerance.<\/p>\n<h3>What tolerance can acrylic rod hold?<\/h3>\n<p>Extruded rod holds about \u00b10.1 mm at small diameters and \u00b10.3 mm at 30\u201360 mm. Cast rod holds roughly \u00b12 % of diameter, which is \u00b10.4 mm on a 20 mm rod. If you need tighter than extruded can hold, the practical route is to buy oversize and machine it.<\/p>\n<h3>Why does my 20 mm rod not fit a 20 mm hole?<\/h3>\n<p>Ovality plus tolerance. A 20 mm rod with \u00b10.2 mm diameter tolerance and 2 % ovality can measure 20.2 mm on one axis \u2014 which will not enter a true 20 mm hole. For a close fit, specify the rod undersize (for example 19.8 \u00b1 0.1 mm) rather than nominal.<\/p>\n<h3>Is acrylic rod measured before or after cooling?<\/h3>\n<p>It should be measured after it has fully cooled and stabilised, because acrylic continues to shrink and to relax stress for some hours after production. A rod measured warm will read slightly large and may bow later.<\/p>\n<h3>Do I need to specify ovality and straightness?<\/h3>\n<p>Only if they matter to your application. For a decorative rod in a display, diameter and appearance are enough. For a rod that fits into a bore, or that spans a visible gap, ovality and straightness are the dimensions that decide whether it works \u2014 and neither is implied by a diameter tolerance.<\/p>\n<h3>Can I get a non-standard diameter?<\/h3>\n<p>Yes, but expect a minimum quantity and a lead time, because a mould tube or a die is dedicated to that size. In many cases it is cheaper to take the nearest standard size and machine it down, particularly in small quantities.<\/p>\n<\/div>\n<div class=\"cta\">\n<p class=\"cta-h\">Send the drawing, or just the diameter and the application<\/p>\n<p>We will tell you which process can hold your tolerance, flag anything on the drawing the process cannot deliver, and quote with ovality, straightness and end finish stated explicitly \u2014 so the goods-in inspection matches the purchase order.<\/p>\n<p><a class=\"btn\" href=\"https:\/\/uplastech.com\/nl\/service\/\">Request a specification review<\/a>\n<\/div>\n<div class=\"rel\">\n<h4>Continue reading<\/h4>\n<ul>\n<li><a href=\"https:\/\/uplastech.com\/nl\/cast-vs-extruded-acrylic-rod\/\">Cast vs Extruded Acrylic Rod: Which One to Specify<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/nl\/how-acrylic-rod-is-made\/\">How Transparent Coloured Acrylic Rod Is Made<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/nl\/acrylic-rod-colour-consistency\/\">Colour Consistency in Transparent Acrylic Rod<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/nl\/acrylic-rod-defects\/\">Acrylic Rod Defects: Bubbles, Crazing and Colour Streaks<\/a><\/li>\n<\/ul>\n<\/div>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>A buyer&#8217;s specification guide to acrylic rod: available diameters, diameter tolerance by process, ovality, bow, cut length, end finish, optical grade and annealing.<\/p>","protected":false},"author":1,"featured_media":7504,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_seopress_titles_title":"Acrylic Rod Sizes, Tolerances and Straightness","_seopress_titles_desc":"Acrylic rod specification guide: diameter range by process, achievable tolerances, ovality, straightness in mm per metre, cut length, end finish, optical grade and annealing.","_seopress_robots_index":"1","_seopress_robots_follow":"1","_seopress_robots_imageindex":"","_seopress_robots_snippet":"","_seopress_robots_primary_cat":"38","_seopress_robots_breadcrumbs":"","_seopress_robots_freeze_modified_date":"","_seopress_robots_custom_modified_date":"","_seopress_robots_canonical":"https:\/\/uplastech.com\/acrylic-rod-specification-guide\/","_seopress_social_fb_title":"","_seopress_social_fb_desc":"","_seopress_social_fb_img":"","_seopress_social_fb_img_attachment_id":0,"_seopress_social_fb_img_width":0,"_seopress_social_fb_img_height":0,"_seopress_social_twitter_title":"","_seopress_social_twitter_desc":"","_seopress_social_twitter_img":"","_seopress_social_twitter_img_attachment_id":0,"_seopress_social_twitter_img_width":0,"_seopress_social_twitter_img_height":0,"_seopress_redirections_value":"","_seopress_redirections_enabled":"","_seopress_redirections_enabled_regex":"","_seopress_redirections_logged_status":"","_seopress_redirections_param":"","_seopress_redirections_type":0,"_seopress_analysis_target_kw":"acrylic rod tolerances","footnotes":""},"categories":[38],"tags":[],"class_list":["post-7501","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-acrylic-rod"],"meta_box":{"post-to-quiz_to":[]},"_links":{"self":[{"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/posts\/7501","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/comments?post=7501"}],"version-history":[{"count":1,"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/posts\/7501\/revisions"}],"predecessor-version":[{"id":7505,"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/posts\/7501\/revisions\/7505"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/media\/7504"}],"wp:attachment":[{"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/media?parent=7501"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/categories?post=7501"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/uplastech.com\/nl\/wp-json\/wp\/v2\/tags?post=7501"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}