{"id":9108,"date":"2024-01-02T01:00:00","date_gmt":"2024-01-02T01:00:00","guid":{"rendered":"https:\/\/uplastech.com\/pet-tray-plug-assist-chill-marks\/"},"modified":"2026-11-08T08:08:44","modified_gmt":"2026-11-08T08:08:44","slug":"pet-tray-plug-assist-chill-marks","status":"publish","type":"post","link":"https:\/\/uplastech.com\/ko\/pet-tray-plug-assist-chill-marks\/","title":{"rendered":"Plug Assist Chill Marks on PET Trays: When a Goods-In Rejection Is a Plug Temperature Problem"},"content":{"rendered":"<style>\n.upl-blog{font-size:17px;line-height:1.78;color:#1f2937}\n.upl-blog p{margin:0 0 18px}\n.upl-blog h2{font-size:26px;line-height:1.3;color:#0b2b33;margin:46px 0 14px;font-weight:700;letter-spacing:-.015em}\n.upl-blog h3{font-size:19.5px;color:#0d3b47;margin:28px 0 10px;font-weight:700}\n.upl-blog ul,.upl-blog ol{margin:0 0 20px;padding-left:22px}\n.upl-blog li{margin:0 0 9px}\n.upl-blog figure{margin:0 0 34px}\n.upl-blog figure img{width:100%;height:auto;display:block;border-radius:10px}\n.upl-blog figcaption{font-size:13px;color:#6b7280;margin-top:10px;line-height:1.5}\n.upl-blog .toc{background:none;border:0;border-radius:0;padding:0;margin:0 0 34px}\n.upl-blog .toc .lwptoc{margin:0}\n.upl-blog .toc h4{margin:0 0 10px;font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#0d5563}\n.upl-blog .toc ol{margin:0;padding-left:18px;font-size:14.5px}\n.upl-blog .toc li{margin-bottom:6px}\n.upl-blog table{width:100%;border-collapse:collapse;font-size:14.5px;margin:0 0 10px}\n.upl-blog th{background:#0d3b47;color:#fff;text-align:left;padding:11px 13px;font-weight:600;font-size:13.5px;border:0}\n.upl-blog td{padding:11px 13px;border:0;border-bottom:1px solid #e8ebed;vertical-align:top}\n.upl-blog tbody tr:nth-child(even){background:#fafbfc}\n.upl-blog .tablecap{font-size:12.5px;color:#6b7280;margin:0 0 30px}\n.upl-blog .myth{background:#fff8ef;border:1px solid #f6ddbd;border-radius:8px;padding:16px 20px;margin:0 0 26px;font-size:15.5px}\n.upl-blog .myth b{color:#a85c10}\n.upl-blog .callout{background:#f2f8f9;border-radius:8px;padding:18px 22px;margin:0 0 26px;font-size:15.5px;border-left:3px solid #14707f}\n.upl-blog .faq h3{border-top:1px solid #eceff1;padding-top:22px;margin-top:0;font-size:18px}\n.upl-blog .faq h3:first-of-type{border-top:0;padding-top:0}\n.upl-blog .cta{background:linear-gradient(135deg,#0b2b33,#0d5563);color:#fff;border-radius:12px;padding:34px;margin:48px 0 30px}\n.upl-blog .cta h2,.upl-blog .cta .cta-h{color:#fff;margin:0 0 10px;font-size:24px;font-weight:700;line-height:1.3}\n.upl-blog .cta p{color:#c9dee3;margin:0 0 20px;font-size:16px}\n.upl-blog .btn{display:inline-block;background:#e07a1f;color:#fff;text-decoration:none;font-weight:700;padding:13px 26px;border-radius:8px;font-size:15.5px}\n.upl-blog .rel{border-top:1px solid #e8ebed;margin-top:40px;padding-top:26px}\n.upl-blog .rel h4{font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#6b7280;margin:0 0 14px}\n.upl-blog .rel ul{list-style:none;padding:0;margin:0}\n.upl-blog .rel li{padding:11px 0;border-bottom:1px dashed #e8ebed}\n.upl-blog .rel a{text-decoration:none;font-weight:600;font-size:15.5px}\n\/* ==UPL-CONVERSION-MODULES-START== 2024 problem-solving \/ lead-gen blocks *\/\n.upl-blog .mod-h{font-size:12.5px;letter-spacing:.12em;text-transform:uppercase;font-weight:700;color:#0d5563;margin:0 0 12px}\n.upl-blog .problem{background:#fff8f3;border:1px solid #f3ddc9;border-left:4px solid #e07a1f;border-radius:10px;padding:22px 26px;margin:0 0 32px;font-size:16px}\n.upl-blog .problem p{margin:0 0 10px}\n.upl-blog .problem p:last-child{margin-bottom:0}\n.upl-blog .problem .mod-h{color:#a85c10}\n.upl-blog .problem .problem-promise{font-weight:700;color:#0b2b33}\n.upl-blog .steps{background:#f7fafb;border:1px solid #e1ebee;border-radius:10px;padding:22px 26px;margin:0 0 28px}\n.upl-blog .steps ol{list-style:none;counter-reset:uplst;margin:0;padding:0}\n.upl-blog .steps li{counter-increment:uplst;position:relative;padding:0 0 16px 42px;margin:0;font-size:15.5px}\n.upl-blog .steps li:last-child{padding-bottom:0}\n.upl-blog .steps li::before{content:counter(uplst);position:absolute;left:0;top:2px;width:26px;height:26px;border-radius:50%;background:#0d5563;color:#fff;font-size:13px;font-weight:700;line-height:26px;text-align:center}\n.upl-blog table.spec th{background:#14707f}\n.upl-blog .conv{background:#eef6f7;border:1px solid #cfe4e8;border-radius:10px;padding:24px 26px;margin:32px 0}\n.upl-blog .conv p{margin:0 0 12px;font-size:15.5px}\n.upl-blog .conv .conv-lbl{font-weight:700;color:#0b2b33;margin:16px 0 8px}\n.upl-blog ul.conv-need{list-style:none;padding:0;margin:0 0 20px;display:grid;grid-template-columns:1fr 1fr;gap:6px 18px}\n.upl-blog ul.conv-need li{position:relative;padding-left:20px;margin:0;font-size:14.5px}\n.upl-blog ul.conv-need li::before{content:\"\";position:absolute;left:0;top:9px;width:9px;height:9px;border:2px solid #14707f;border-radius:2px}\n.upl-blog .conv-btn{display:inline-block;background:#0d5563;color:#fff;text-decoration:none;font-weight:700;padding:11px 22px;border-radius:7px;font-size:15px}\n.upl-blog .checklist{background:#fbfcfd;border:1px solid #e3e9ec;border-radius:10px;padding:24px 26px;margin:36px 0}\n.upl-blog .checklist ul{list-style:none;padding:0;margin:0 0 12px}\n.upl-blog .checklist li{position:relative;padding-left:28px;margin:0 0 10px;font-size:15.5px}\n.upl-blog .checklist li::before{content:\"\";position:absolute;left:0;top:7px;width:14px;height:14px;border:2px solid #0d5563;border-radius:3px}\n.upl-blog .cl-note{font-size:13.5px;color:#6b7280;margin:0}\n.upl-blog .cta .cta-lbl{color:#c9dee3;font-weight:700;margin:0 0 8px;font-size:14.5px}\n.upl-blog ul.cta-need{list-style:none;padding:0;margin:0 0 22px;display:grid;grid-template-columns:1fr 1fr;gap:4px 18px}\n.upl-blog ul.cta-need li{color:#e4f0f2;font-size:14.5px;padding-left:18px;position:relative;margin:0}\n.upl-blog ul.cta-need li::before{content:\"\\2713\";position:absolute;left:0;color:#e07a1f;font-weight:700}\n\/* ==UPL-CONVERSION-MODULES-END== *\/\n@media(max-width:640px){.upl-blog h2{font-size:22px}.upl-blog table{font-size:13px}.upl-blog .cta{padding:24px}.upl-blog ul.conv-need,.upl-blog ul.cta-need{grid-template-columns:1fr}.upl-blog .problem,.upl-blog .steps,.upl-blog .conv,.upl-blog .checklist{padding:18px}}\n\/* \u5355\u7bc7\u9875\u9690\u85cf WhatsApp \u95ee\u5019\u5361\uff0c\u53ea\u4fdd\u7559\u5706\u5f62\u6c14\u6ce1\uff0c\u907f\u514d\u906e\u6321\u4fa7\u680f\u8be2\u76d8\u63d0\u4ea4\u6309\u94ae\u3002\n   \u6ce8\u610f\uff1aClick to Chat \u7684\u70b9\u51fb\u903b\u8f91\u662f\u300c\u95ee\u5019\u5361\u5143\u7d20\u5b58\u5728\u5c31\u4e0d\u8df3\u8f6c\u300d\uff0c\u53ea\u9760 CSS \u9690\u85cf\u4f1a\u8ba9\u6c14\u6ce1\u53d8\u6210\u6b7b\u94fe\u63a5\u3002\n   Code Snippets #9\u300cUPL single post: WhatsApp bubble jumps straight to chat\u300d\u8d1f\u8d23\u628a\u8be5\u8282\u70b9\u4ece DOM \u79fb\u9664\uff0c\n   \u4e0b\u9762\u8fd9\u6761 CSS \u53ea\u662f\u79fb\u9664\u524d\u7684\u89c6\u89c9\u515c\u5e95\u3002\u5220 #9 \u524d\u5fc5\u987b\u5148\u5220\u8fd9\u6761\u89c4\u5219\u3002 *\/\nbody.single-post .ht_ctc_chat_greetings_box{display:none !important}\n<\/style>\n<div class=\"upl-blog\">\n<figure>\n<img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/uplastech.com\/wp-content\/uploads\/2026\/11\/2024-pet-tray-plug-assist-chill-marks-hero.jpg\" alt=\"Real thermoformed plastic tray and packaging components\" width=\"1536\" height=\"909\"><figcaption>Real thermoforming production context. Photo: Pexels.<\/figcaption><\/figure>\n<div class=\"problem\">\n<p class=\"mod-h\">The problem<\/p>\n<p><b>Symptom.<\/b> A retailer rejects a batch of clear PET trays because a hazy circular disc shows through the label at the centre of every base, visible only under the goods-in light booth.<\/p>\n<p><b>What it costs.<\/b> At 40 000 trays per order, a 6 % cosmetic reject and a re-inspection hold cost more than the heated plugs that would have prevented the mark.<\/p>\n<p class=\"problem-promise\">This guide shows how to measure plug chill marks, set a plug-to-sheet temperature difference, and write a label-zone clarity clause into the purchase order.<\/p>\n<\/div>\n<div class=\"toc\"><\/div>\n<h2 id=\"reading-the-mark-chill-blush-versus-a-true-gauge-defect\">Reading the mark: chill blush versus a true gauge defect<\/h2>\n<p>A plug chill mark is a local gloss loss, not a thinning fault. On 0.6 mm APET it reads as a 2-8 \u00b5m matte disc, 20-40 mm across, centred on the plug axis.<\/p>\n<table>\n<thead>\n<tr>\n<th>What the inspector sees<\/th>\n<th>What is physically happening<\/th>\n<th>First measurement<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>A matte disc centred on the base<\/td>\n<td>Plug chilled the contact patch below the PET forming temperature<\/td>\n<td>Plug face thermocouple vs sheet temperature, 30 shots<\/td>\n<\/tr>\n<tr>\n<td>A ring or halo, not a solid disc<\/td>\n<td>Plug dwelt long enough to freeze an orientation gradient<\/td>\n<td>Contact dwell time from the servo log<\/td>\n<\/tr>\n<tr>\n<td>Mark only on alternate cavities<\/td>\n<td>One plug heater or felt cover is out of specification<\/td>\n<td>Per-cavity plug temperature map<\/td>\n<\/tr>\n<tr>\n<td>A sharp crease, not a soft blush<\/td>\n<td>Plug too fast, folding the sheet instead of stretching it<\/td>\n<td>Plug entry speed and vacuum delay<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 1 - Classifying a base mark before adjusting the former<\/p>\n<div class=\"callout\">Record which of these you are actually seeing before changing any setting. Two faults can look identical on the line and need opposite corrections.<\/div>\n<p><!-- upl-conv-v1 quickcta --><\/p>\n<div class=\"quickcta\">\n<p class=\"mod-h\">Need a fixed price for this formed tray?<\/p>\n<p>Send the tray drawing, sheet gauge and annual volume. We will review draft, trim and material, then quote a production tool with a written line-acceptance test.<\/p>\n<p class=\"quickcta-act\"><a class=\"quickcta-btn\" href=\"https:\/\/uplastech.com\/vacuum-forming\/\">Get a thermoforming quotation<\/a><a class=\"quickcta-alt\" href=\"mailto:john@uplastech.com\">Email john@uplastech.com<\/a><a class=\"quickcta-alt\" href=\"https:\/\/wa.me\/8617717529949\">WhatsApp<\/a><\/p>\n<\/div>\n<h2 id=\"measure-plug-temperature-and-mark-depth-before-changing-the-cycle\">Measure plug temperature and mark depth before changing the cycle<\/h2>\n<p>Log plug-face temperature over 30 shots, then measure the mark by stylus profilometry at 5\u00d7. We usually find a 28 \u00b0C plug against a 92 \u00b0C sheet, a 64 \u00b0C gap that prints a disc.<\/p>\n<div class=\"steps\">\n<p class=\"mod-h\">A five-step diagnostic sequence<\/p>\n<ol>\n<li><b>Map the plug temperature.<\/b><br \/>Log plug-face temperature over 30 shots at production cycle rate, not on a cold tool.<\/li>\n<li><b>Measure the mark.<\/b><br \/>Use stylus profilometry at 5\u00d7 to record depth in \u00b5m across the label zone.<\/li>\n<li><b>Tag by cavity.<\/b><br \/>Compare marks across every cavity to separate a plug fault from a sheet fault.<\/li>\n<li><b>Sweep contact dwell.<\/b><br \/>Run 0.2, 0.4 and 0.9 s dwells and plot mark depth against dwell time.<\/li>\n<li><b>Hold the acceptance shot.<\/b><br \/>Retain 30 approved trays under D65 light as the visual reference for goods-in.<\/li>\n<\/ol>\n<\/div>\n<p>The chart below is a typical result from that measurement step. Use it to separate a design limit from a setting that can still be recovered.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/uplastech.com\/wp-content\/uploads\/2026\/11\/pet-tray-plug-assist-chill-marks-chart3.jpg\" alt=\"Plug Assist Chill Marks on PET Trays: When a Goods-In Rejection Is a Plug Temperature Problem: calculated response trend and an illustrative root-cause split\" width=\"1536\" height=\"909\"><figcaption>Figure 1 \u2014 Calculated response trend and an illustrative root-cause split. Values are engineering guidance for diagnosis, not a measured survey; confirm them on your own line before changing a drawing or a specification.<\/figcaption><\/figure>\n<h2 id=\"plug-material-temperature-and-contact-time-to-specify\">Plug material, temperature and contact time to specify<\/h2>\n<p>Specify plug temperature, dwell and entry speed. Hold the plug within 15 \u00b0C of the sheet, dwell under 0.4 s and entry near 0.5 m\/s; a 0.9 s dwell prints a ring every shot.<\/p>\n<table class=\"spec\">\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>Typical target<\/th>\n<th>What goes wrong outside it<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Plug-to-sheet temperature difference<\/td>\n<td>\u2264 15 \u00b0C<\/td>\n<td>A cold plug chills a visible matte disc into the base<\/td>\n<\/tr>\n<tr>\n<td>Plug contact dwell<\/td>\n<td>\u2264 0.4 s<\/td>\n<td>Longer dwell freezes an orientation ring around the plug<\/td>\n<\/tr>\n<tr>\n<td>Plug entry speed<\/td>\n<td>0.3 - 0.8 m\/s<\/td>\n<td>Fast entry folds the sheet instead of stretching it<\/td>\n<\/tr>\n<tr>\n<td>Mark depth in label zone<\/td>\n<td>\u2264 3 \u00b5m<\/td>\n<td>Deeper marks read through the label under D65 light<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 2 - Plug assist parameters to write on the tool specification<\/p>\n<h2 id=\"process-variables-that-bring-the-mark-back-after-sign-off\">Process variables that bring the mark back after sign-off<\/h2>\n<p>Even a qualified tool drifts back. A worn felt cover, a 10 \u00b0C cold-start heater drop, or a lot with 3 % higher crystallinity all widen the gap, so log plug temperature per shift.<\/p>\n<table>\n<thead>\n<tr>\n<th>Process variable<\/th>\n<th>Effect on the mark<\/th>\n<th>Practical control<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Plug felt cover worn past 0.5 mm<\/td>\n<td>Local contact pressure rises and blush returns<\/td>\n<td>Replace covers on a shot-count schedule<\/td>\n<\/tr>\n<tr>\n<td>Heater output down 10 \u00b0C on cold start<\/td>\n<td>Sheet-to-plug gap widens above 15 \u00b0C<\/td>\n<td>Warm-up interlock before first good shot<\/td>\n<\/tr>\n<tr>\n<td>Sheet crystallinity up 3 %<\/td>\n<td>Haze contrasts more strongly against the mark<\/td>\n<td>Qualify the tool at both resin-lot limits<\/td>\n<\/tr>\n<tr>\n<td>Vacuum delayed 0.3 s<\/td>\n<td>Plug stays in contact longer and prints a ring<\/td>\n<td>Lock vacuum delay in the recipe<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 3 - Process variables that restore chill marks after sign-off<\/p>\n<div class=\"myth\"><b>Myth:<\/b> \"A process adjustment will fix it.\" Once a design limit is reached, more tuning only adds cost and variation. Confirm the limit with a measurement, then change the drawing or the specification.<\/div>\n<h2 id=\"a-label-zone-clarity-test-for-the-purchase-order\">A label-zone clarity test for the purchase order<\/h2>\n<p>A drawing cannot describe a chill mark, so add a functional clause: no visible disc under D65 at 500 mm, depth below 3 \u00b5m, verified on 30 trays from every cavity and three lots.<\/p>\n<div class=\"conv\">\n<p class=\"mod-h\">Want the tray checked against your line?<\/p>\n<p>Send us the tray drawing and the line conditions. We will flag the geometry and material choices that cause jams, and quote a tool with an acceptance test.<\/p>\n<p class=\"conv-lbl\">What to send us<\/p>\n<ul class=\"conv-need\">\n<li>Tray drawing with draft and radii<\/li>\n<li>Sheet grade and gauge<\/li>\n<li>Stack depth and line speed<\/li>\n<li>Drawings of the magazine or denester<\/li>\n<\/ul>\n<p><a class=\"conv-btn\" href=\"\/vacuum-forming\/\">Send the tray drawing<\/a>\n<\/div>\n<h2 id=\"costing-heated-plugs-against-a-permanent-cosmetic-reject-rate\">Costing heated plugs against a permanent cosmetic reject rate<\/h2>\n<p>Heated aluminium plugs with closed-loop control cost roughly \u00a31 800-3 000 per tool but remove the 6 % cosmetic reject. Against a 40 000-tray order, rework and hold costs repay the change within two batches.<\/p>\n<div class=\"callout\">Validate one change at a time and keep the measurement record. A supplier discussion backed by data is resolved in days, not weeks.<\/div>\n<div class=\"checklist\">\n<p class=\"mod-h\">Before you sign off this thermoformed tool<\/p>\n<ul>\n<li>Plug surface temperature and its control method are stated on the tool specification<\/li>\n<li>A maximum plug-to-sheet temperature difference of 15 \u00b0C is agreed at first-off<\/li>\n<li>No visible disc in the label zone under D65 at 500 mm is written into the acceptance clause<\/li>\n<li>Mark depth is measured by profilometry, not judged by eye alone<\/li>\n<li>Approved reference trays from three sheet lots and every cavity are retained<\/li>\n<\/ul>\n<p class=\"cl-note\">A tray that looks right in the carton can still stop a filling line. Test the stack, not a single part.<\/p>\n<\/div>\n<div class=\"faq\">\n<h3>Can a hotter sheet hide a cold plug?<\/h3>\n<p>It reduces the contrast but not the cause. Raising sheet temperature to 100 \u00b0C while the plug stays at 28 \u00b0C still leaves a 72 \u00b0C gap and risks sag. Heat the plug itself and close the gap to within 15 \u00b0C.<\/p>\n<h3>Why do only some cavities show the mark?<\/h3>\n<p>Almost always one plug heater, felt cover or air line is out of specification. Map plug temperature per cavity; a single cold station prints a disc while its neighbours stay clear.<\/p>\n<h3>Is a syntactic-foam plug better than heated aluminium?<\/h3>\n<p>Foam plugs insulate and reduce marking but wear and drift with shot count. Heated aluminium with closed-loop control holds a stable 80-90 \u00b0C face and is easier to qualify for a cosmetic clause.<\/p>\n<h3>What magnification should goods-in use?<\/h3>\n<p>A 5\u00d7 loupe under D65 at 500 mm catches discs that a naked-eye check misses. Pair it with a profilometer limit of 3 \u00b5m so the decision is a number, not an opinion.<\/p>\n<h3>Will the mark disappear after the tray is filled?<\/h3>\n<p>No. The disc is a surface-gloss change fixed into the PET, and a chilled or labelled base often makes it more visible. Reject it at goods-in rather than hoping the contents hide it.<\/p>\n<h3>How many trays should the acceptance sample cover?<\/h3>\n<p>Thirty trays from every cavity and at least three sheet lots, checked under D65 at 500 mm with mark depth recorded. Cosmetic faults cluster by cavity and lot, so a single-tray sample proves very little.<\/p>\n<\/div>\n<div class=\"cta\">\n<p class=\"cta-h\">Get a tray that runs on your filling line<\/p>\n<p>Send us the tray drawing or a sample stack. We will review draft, trim and material, then quote a production tool with a measurable line-acceptance test written into it.<\/p>\n<p class=\"cta-lbl\">To get an accurate quote, send:<\/p>\n<ul class=\"cta-need\">\n<li>Tray drawing or sample stack<\/li>\n<li>Sheet material and gauge<\/li>\n<li>Line speed and denesting method<\/li>\n<li>Annual volume and target unit price<\/li>\n<\/ul>\n<p><a class=\"btn\" href=\"\/vacuum-forming\/\">Request a tool and tray quotation<\/a><br \/>\n<!-- upl-conv-v1 contact --><\/p>\n<div class=\"contactbar\">\n<p class=\"contactbar-h\">Prefer to talk it through first?<\/p>\n<p>Email <a href=\"mailto:john@uplastech.com\">john@uplastech.com<\/a> or message us on <a href=\"https:\/\/wa.me\/8617717529949\">WhatsApp +86 177 1752 9949<\/a>. Send a drawing, a sample or a specification and an engineer will reply.<\/p>\n<\/div>\n<p><!-- upl-conv-v1 trust --><\/p>\n<div class=\"trust\">\n<p class=\"trust-h\">Why buyers work with Uplastech<\/p>\n<p>ISO 9001, ISO 14001 and ISO 45001 certified. Founded in 2016, with injection moulding lines in Shanghai and an extrusion plant in Jiangsu. Moulding machines from 90T to 1100T and a maximum shot weight of 5100 g. Samples and a written quotation are available on request.<\/p>\n<\/div>\n<\/div>\n<div class=\"rel\">\n<h4>Continue reading<\/h4>\n<ul>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-sheet-thickness-tolerance\/\">Thermoforming sheet thickness tolerance<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-stacking-nesting\/\">Thermoforming stacking and nesting<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-tolerances\/\">Thermoforming tolerances<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/thermoforming-trimming-methods\/\">Thermoforming trimming methods<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/effects-of-manufacturing-defects-on-thermoformed-packaging-quality\/\">Manufacturing defects in thermoformed packaging<\/a><\/li>\n<\/ul>\n<p><!-- upl-conv-v1 service --><\/p>\n<p class=\"rel-svc\">Ready to specify? See our <a href=\"https:\/\/uplastech.com\/vacuum-forming\/\">vacuum forming and thermoforming services<\/a> or <a href=\"mailto:john@uplastech.com\">request a written quotation<\/a>.<\/p>\n<\/div>\n<\/div>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Can a hotter sheet hide a cold plug?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"It reduces the contrast but not the cause. Raising sheet temperature to 100 \u00b0C while the plug stays at 28 \u00b0C still leaves a 72 \u00b0C gap and risks sag. Heat the plug itself and close the gap to within 15 \u00b0C.\"}}, {\"@type\": \"Question\", \"name\": \"Why do only some cavities show the mark?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Almost always one plug heater, felt cover or air line is out of specification. Map plug temperature per cavity; a single cold station prints a disc while its neighbours stay clear.\"}}, {\"@type\": \"Question\", \"name\": \"Is a syntactic-foam plug better than heated aluminium?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Foam plugs insulate and reduce marking but wear and drift with shot count. Heated aluminium with closed-loop control holds a stable 80-90 \u00b0C face and is easier to qualify for a cosmetic clause.\"}}, {\"@type\": \"Question\", \"name\": \"What magnification should goods-in use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 5\u00d7 loupe under D65 at 500 mm catches discs that a naked-eye check misses. Pair it with a profilometer limit of 3 \u00b5m so the decision is a number, not an opinion.\"}}, {\"@type\": \"Question\", \"name\": \"Will the mark disappear after the tray is filled?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. The disc is a surface-gloss change fixed into the PET, and a chilled or labelled base often makes it more visible. Reject it at goods-in rather than hoping the contents hide it.\"}}, {\"@type\": \"Question\", \"name\": \"How many trays should the acceptance sample cover?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Thirty trays from every cavity and at least three sheet lots, checked under D65 at 500 mm with mark depth recorded. Cosmetic faults cluster by cavity and lot, so a single-tray sample proves very little.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>This guide shows how to measure plug chill marks, set a plug-to-sheet temperature difference, and write a label-zone clarity clause into the purchase order.<\/p>","protected":false},"author":1,"featured_media":9106,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[29],"tags":[],"class_list":["post-9108","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-vacuum-forming"],"meta_box":{"post-to-quiz_to":[]},"_links":{"self":[{"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/posts\/9108","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/comments?post=9108"}],"version-history":[{"count":1,"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/posts\/9108\/revisions"}],"predecessor-version":[{"id":9223,"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/posts\/9108\/revisions\/9223"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/media\/9106"}],"wp:attachment":[{"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/media?parent=9108"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/categories?post=9108"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/uplastech.com\/ko\/wp-json\/wp\/v2\/tags?post=9108"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}