{"id":9346,"date":"2024-01-16T01:00:00","date_gmt":"2024-01-16T01:00:00","guid":{"rendered":"https:\/\/uplastech.com\/moulded-boss-screw-stripping-torque-acceptance\/"},"modified":"2026-11-08T08:12:17","modified_gmt":"2026-11-08T08:12:17","slug":"moulded-boss-screw-stripping-torque-acceptance","status":"publish","type":"post","link":"https:\/\/uplastech.com\/fr\/moulded-boss-screw-stripping-torque-acceptance\/","title":{"rendered":"Stripped Screw Bosses: Specify the Strip Torque, Not Just the Hole"},"content":{"rendered":"<style>\n.upl-blog{font-size:17px;line-height:1.78;color:#1f2937}\n.upl-blog p{margin:0 0 18px}\n.upl-blog h2{font-size:26px;line-height:1.3;color:#0b2b33;margin:46px 0 14px;font-weight:700;letter-spacing:-.015em}\n.upl-blog h3{font-size:19.5px;color:#0d3b47;margin:28px 0 10px;font-weight:700}\n.upl-blog ul,.upl-blog ol{margin:0 0 20px;padding-left:22px}\n.upl-blog li{margin:0 0 9px}\n.upl-blog figure{margin:0 0 34px}\n.upl-blog figure img{width:100%;height:auto;display:block;border-radius:10px}\n.upl-blog figcaption{font-size:13px;color:#6b7280;margin-top:10px;line-height:1.5}\n.upl-blog .toc{background:none;border:0;border-radius:0;padding:0;margin:0 0 34px}\n.upl-blog .toc .lwptoc{margin:0}\n.upl-blog .toc h4{margin:0 0 10px;font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#0d5563}\n.upl-blog .toc ol{margin:0;padding-left:18px;font-size:14.5px}\n.upl-blog .toc li{margin-bottom:6px}\n.upl-blog table{width:100%;border-collapse:collapse;font-size:14.5px;margin:0 0 10px}\n.upl-blog th{background:#0d3b47;color:#fff;text-align:left;padding:11px 13px;font-weight:600;font-size:13.5px;border:0}\n.upl-blog td{padding:11px 13px;border:0;border-bottom:1px solid #e8ebed;vertical-align:top}\n.upl-blog tbody tr:nth-child(even){background:#fafbfc}\n.upl-blog .tablecap{font-size:12.5px;color:#6b7280;margin:0 0 30px}\n.upl-blog .myth{background:#fff8ef;border:1px solid #f6ddbd;border-radius:8px;padding:16px 20px;margin:0 0 26px;font-size:15.5px}\n.upl-blog .myth b{color:#a85c10}\n.upl-blog .callout{background:#f2f8f9;border-radius:8px;padding:18px 22px;margin:0 0 26px;font-size:15.5px;border-left:3px solid #14707f}\n.upl-blog .faq h3{border-top:1px solid #eceff1;padding-top:22px;margin-top:0;font-size:18px}\n.upl-blog .faq h3:first-of-type{border-top:0;padding-top:0}\n.upl-blog .cta{background:linear-gradient(135deg,#0b2b33,#0d5563);color:#fff;border-radius:12px;padding:34px;margin:48px 0 30px}\n.upl-blog .cta h2,.upl-blog .cta .cta-h{color:#fff;margin:0 0 10px;font-size:24px;font-weight:700;line-height:1.3}\n.upl-blog .cta p{color:#c9dee3;margin:0 0 20px;font-size:16px}\n.upl-blog .btn{display:inline-block;background:#e07a1f;color:#fff;text-decoration:none;font-weight:700;padding:13px 26px;border-radius:8px;font-size:15.5px}\n.upl-blog .rel{border-top:1px solid #e8ebed;margin-top:40px;padding-top:26px}\n.upl-blog .rel h4{font-size:13px;letter-spacing:.1em;text-transform:uppercase;color:#6b7280;margin:0 0 14px}\n.upl-blog .rel ul{list-style:none;padding:0;margin:0}\n.upl-blog .rel li{padding:11px 0;border-bottom:1px dashed #e8ebed}\n.upl-blog .rel a{text-decoration:none;font-weight:600;font-size:15.5px}\n\/* ==UPL-CONVERSION-MODULES-START== 2024 problem-solving \/ lead-gen blocks *\/\n.upl-blog .mod-h{font-size:12.5px;letter-spacing:.12em;text-transform:uppercase;font-weight:700;color:#0d5563;margin:0 0 12px}\n.upl-blog .problem{background:#fff8f3;border:1px solid #f3ddc9;border-left:4px solid #e07a1f;border-radius:10px;padding:22px 26px;margin:0 0 32px;font-size:16px}\n.upl-blog .problem p{margin:0 0 10px}\n.upl-blog .problem p:last-child{margin-bottom:0}\n.upl-blog .problem .mod-h{color:#a85c10}\n.upl-blog .problem .problem-promise{font-weight:700;color:#0b2b33}\n.upl-blog .steps{background:#f7fafb;border:1px solid #e1ebee;border-radius:10px;padding:22px 26px;margin:0 0 28px}\n.upl-blog .steps ol{list-style:none;counter-reset:uplst;margin:0;padding:0}\n.upl-blog .steps li{counter-increment:uplst;position:relative;padding:0 0 16px 42px;margin:0;font-size:15.5px}\n.upl-blog .steps li:last-child{padding-bottom:0}\n.upl-blog .steps li::before{content:counter(uplst);position:absolute;left:0;top:2px;width:26px;height:26px;border-radius:50%;background:#0d5563;color:#fff;font-size:13px;font-weight:700;line-height:26px;text-align:center}\n.upl-blog table.spec th{background:#14707f}\n.upl-blog .conv{background:#eef6f7;border:1px solid #cfe4e8;border-radius:10px;padding:24px 26px;margin:32px 0}\n.upl-blog .conv p{margin:0 0 12px;font-size:15.5px}\n.upl-blog .conv .conv-lbl{font-weight:700;color:#0b2b33;margin:16px 0 8px}\n.upl-blog ul.conv-need{list-style:none;padding:0;margin:0 0 20px;display:grid;grid-template-columns:1fr 1fr;gap:6px 18px}\n.upl-blog ul.conv-need li{position:relative;padding-left:20px;margin:0;font-size:14.5px}\n.upl-blog ul.conv-need li::before{content:\"\";position:absolute;left:0;top:9px;width:9px;height:9px;border:2px solid #14707f;border-radius:2px}\n.upl-blog .conv-btn{display:inline-block;background:#0d5563;color:#fff;text-decoration:none;font-weight:700;padding:11px 22px;border-radius:7px;font-size:15px}\n.upl-blog .checklist{background:#fbfcfd;border:1px solid #e3e9ec;border-radius:10px;padding:24px 26px;margin:36px 0}\n.upl-blog .checklist ul{list-style:none;padding:0;margin:0 0 12px}\n.upl-blog .checklist li{position:relative;padding-left:28px;margin:0 0 10px;font-size:15.5px}\n.upl-blog .checklist li::before{content:\"\";position:absolute;left:0;top:7px;width:14px;height:14px;border:2px solid #0d5563;border-radius:3px}\n.upl-blog .cl-note{font-size:13.5px;color:#6b7280;margin:0}\n.upl-blog .cta .cta-lbl{color:#c9dee3;font-weight:700;margin:0 0 8px;font-size:14.5px}\n.upl-blog ul.cta-need{list-style:none;padding:0;margin:0 0 22px;display:grid;grid-template-columns:1fr 1fr;gap:4px 18px}\n.upl-blog ul.cta-need li{color:#e4f0f2;font-size:14.5px;padding-left:18px;position:relative;margin:0}\n.upl-blog ul.cta-need li::before{content:\"\\2713\";position:absolute;left:0;color:#e07a1f;font-weight:700}\n\/* ==UPL-CONVERSION-MODULES-END== *\/\n@media(max-width:640px){.upl-blog h2{font-size:22px}.upl-blog table{font-size:13px}.upl-blog .cta{padding:24px}.upl-blog ul.conv-need,.upl-blog ul.cta-need{grid-template-columns:1fr}.upl-blog .problem,.upl-blog .steps,.upl-blog .conv,.upl-blog .checklist{padding:18px}}\n\/* \u5355\u7bc7\u9875\u9690\u85cf WhatsApp \u95ee\u5019\u5361\uff0c\u53ea\u4fdd\u7559\u5706\u5f62\u6c14\u6ce1\uff0c\u907f\u514d\u906e\u6321\u4fa7\u680f\u8be2\u76d8\u63d0\u4ea4\u6309\u94ae\u3002\n   \u6ce8\u610f\uff1aClick to Chat \u7684\u70b9\u51fb\u903b\u8f91\u662f\u300c\u95ee\u5019\u5361\u5143\u7d20\u5b58\u5728\u5c31\u4e0d\u8df3\u8f6c\u300d\uff0c\u53ea\u9760 CSS \u9690\u85cf\u4f1a\u8ba9\u6c14\u6ce1\u53d8\u6210\u6b7b\u94fe\u63a5\u3002\n   Code Snippets #9\u300cUPL single post: WhatsApp bubble jumps straight to chat\u300d\u8d1f\u8d23\u628a\u8be5\u8282\u70b9\u4ece DOM \u79fb\u9664\uff0c\n   \u4e0b\u9762\u8fd9\u6761 CSS \u53ea\u662f\u79fb\u9664\u524d\u7684\u89c6\u89c9\u515c\u5e95\u3002\u5220 #9 \u524d\u5fc5\u987b\u5148\u5220\u8fd9\u6761\u89c4\u5219\u3002 *\/\nbody.single-post .ht_ctc_chat_greetings_box{display:none !important}\n<\/style>\n<div class=\"upl-blog\">\n<figure>\n<img fetchpriority=\"high\" decoding=\"async\" src=\"https:\/\/uplastech.com\/wp-content\/uploads\/2026\/11\/2024-moulded-boss-screw-stripping-torque-acceptance-hero.jpg\" alt=\"Real production view of an injection moulding machine and moulded parts\" width=\"1536\" height=\"909\"><figcaption>Real injection molding production context. Photo: Pexels.<\/figcaption><\/figure>\n<div class=\"problem\">\n<p class=\"mod-h\">The problem<\/p>\n<p><b>Symptom.<\/b> A 4.2 mm self-tapping screw strips its PC\/ABS boss at 0.9 N.m, below the 1.2 N.m assembly seating torque, because the pilot hole was opened to 3.8 mm and the boss OD cut to 8.0 mm.<\/p>\n<p><b>What it costs.<\/b> Bosses strip on the assembly line after other parts are fitted, so a hidden drawing fault turns into scrapped housings and a dispute over whether the screw, the hole or the torque driver is to blame.<\/p>\n<p class=\"problem-promise\">This guide links boss geometry to strip torque, gives the OD\/ID and pilot-hole figures for the drawing, and sets a strip-to-drive torque acceptance test before first article.<\/p>\n<\/div>\n<div class=\"toc\"><\/div>\n<h2 id=\"what-a-stripped-boss-looks-like-on-the-line\">What a stripped boss looks like on the line<\/h2>\n<p>Strip torque scales with the wall around the screw. A 4.2 mm screw in a 3.4 mm hole and 10.0 mm boss OD holds 3.4 N.m; a 3.8 mm hole in an 8.0 mm OD falls to 0.9 N.m.<\/p>\n<table>\n<thead>\n<tr>\n<th>Observed result<\/th>\n<th>Most likely cause<\/th>\n<th>First check on the order<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Boss strips at 0.9 N.m, below 1.2 N.m seating<\/td>\n<td>Pilot hole opened to 3.8 mm<\/td>\n<td>Measure the pilot hole and boss OD on section<\/td>\n<\/tr>\n<tr>\n<td>Strip torque scatters between drivers<\/td>\n<td>Torque tool out of calibration<\/td>\n<td>Check the driver certificate and setting<\/td>\n<\/tr>\n<tr>\n<td>Only one cavity strips<\/td>\n<td>Local core pin undersized<\/td>\n<td>Log strip torque by cavity number<\/td>\n<\/tr>\n<tr>\n<td>Screw spins but boss does not crack<\/td>\n<td>Engagement under 10 mm<\/td>\n<td>Measure thread engagement length<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 1 - Reading a stripped boss before changing the screw<\/p>\n<div class=\"callout\">Record which of these you are actually seeing before changing any setting. Two faults can look identical on the line and need opposite corrections.<\/div>\n<p><!-- upl-conv-v1 quickcta --><\/p>\n<div class=\"quickcta\">\n<p class=\"mod-h\">Need a fixed price for this moulded part?<\/p>\n<p>Send the 2D drawing, resin grade and annual volume. Our engineers return a DFM review, a material recommendation and a written quotation you can compare line by line.<\/p>\n<p class=\"quickcta-act\"><a class=\"quickcta-btn\" href=\"https:\/\/uplastech.com\/injection-molding\/\">Get a moulding quotation<\/a><a class=\"quickcta-alt\" href=\"mailto:john@uplastech.com\">Email john@uplastech.com<\/a><a class=\"quickcta-alt\" href=\"https:\/\/wa.me\/8617717529949\">WhatsApp<\/a><\/p>\n<\/div>\n<h2 id=\"separate-a-geometry-fault-from-the-torque-driver\">Separate a geometry fault from the torque driver<\/h2>\n<p>Torque 10 fresh bosses to failure with a calibrated driver set to 1.2 N.m seating. A strip near 0.9 N.m with a clean, reamed 3.8 mm hole is geometry; scatter across drivers points at the torque tool.<\/p>\n<div class=\"steps\">\n<p class=\"mod-h\">A five-step diagnostic sequence<\/p>\n<ol>\n<li><b>Pull the drawing, the screw spec and the driver log.<\/b><br \/>Compare the quoted 3.4 mm hole and 10.0 mm OD with the 3.8 mm hole and 8.0 mm OD actually moulded.<\/li>\n<li><b>Torque 10 fresh bosses to failure.<\/b><br \/>Use a calibrated driver at 1.2 N.m seating; a 0.9 N.m strip with a clean hole is geometry.<\/li>\n<li><b>Section a stripped boss and measure the wall.<\/b><br \/>A 3.8 mm hole in an 8.0 mm OD leaves only 2.1 mm of wall against 3.3 mm on the drawing.<\/li>\n<li><b>Check engagement length and core pins by cavity.<\/b><br \/>Confirm 10 mm engagement; one weak cavity usually means an undersized core pin.<\/li>\n<li><b>Re-cut the hole and re-qualify the torque test.<\/b><br \/>Return to 3.4 mm and certify strip torque of at least 3.0 N.m on 10 bosses per cavity.<\/li>\n<\/ol>\n<\/div>\n<p>The chart below is a typical result from that measurement step. Use it to separate a design limit from a setting that can still be recovered.<\/p>\n<figure>\n<img decoding=\"async\" src=\"https:\/\/uplastech.com\/wp-content\/uploads\/2026\/11\/moulded-boss-screw-stripping-torque-acceptance-chart.jpg\" alt=\"Stripped Screw Bosses: Specify the Strip Torque, Not Just the Hole: calculated response trend and an illustrative root-cause split\" width=\"1536\" height=\"909\"><figcaption>Figure 1 \u2014 Calculated response trend and an illustrative root-cause split. Values are engineering guidance for diagnosis, not a measured survey; confirm them on your own line before changing a drawing or a specification.<\/figcaption><\/figure>\n<h2 id=\"boss-dimensions-that-belong-on-the-drawing\">Boss dimensions that belong on the drawing<\/h2>\n<p>Put the boss on the drawing: 10.0 mm OD, a 3.4 mm pilot hole for the 4.2 mm screw, 10 mm engagement, and a wall of 3.3 mm, giving an OD-to-screw ratio of 2.4 and a strip-to-drive ratio above 2.5.<\/p>\n<table class=\"spec\">\n<thead>\n<tr>\n<th>Parameter<\/th>\n<th>Typical target<\/th>\n<th>What goes wrong outside it<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Pilot hole for a 4.2 mm screw<\/td>\n<td>3.4 mm, about 0.8 x diameter<\/td>\n<td>At 3.8 mm strip torque falls to 0.9 N.m<\/td>\n<\/tr>\n<tr>\n<td>Boss OD \/ screw diameter<\/td>\n<td>2.4, about 10.0 mm OD<\/td>\n<td>Below 2.0 the wall cannot hold the hoop load<\/td>\n<\/tr>\n<tr>\n<td>Boss wall thickness<\/td>\n<td>3.3 mm at 10.0 mm OD<\/td>\n<td>A 3.8 mm hole in 8.0 mm OD leaves 2.1 mm<\/td>\n<\/tr>\n<tr>\n<td>Strip \/ drive torque ratio<\/td>\n<td>Above 2.5 at 1.2 N.m seating<\/td>\n<td>Below it the boss strips during assembly<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 2 - Boss and torque parameters for the part drawing<\/p>\n<h2 id=\"hole-wall-and-engagement-that-set-strip-torque\">Hole, wall and engagement that set strip torque<\/h2>\n<p>A pilot hole above 0.85 times the screw diameter leaves too little thread engagement, and a boss OD below 2.0 times the screw diameter leaves too little hoop strength. Both cut strip torque below the 3.0 N.m floor.<\/p>\n<table>\n<thead>\n<tr>\n<th>Decision<\/th>\n<th>Effect on strip torque<\/th>\n<th>Trade-off<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td>Re-cut pilot hole to 3.4 mm<\/td>\n<td>Restores 3.4 N.m strip torque<\/td>\n<td>One-off core pin change<\/td>\n<\/tr>\n<tr>\n<td>Raise boss OD from 8.0 to 10.0 mm<\/td>\n<td>Adds 3.3 mm of wall<\/td>\n<td>Larger boss may sink on the A-face<\/td>\n<\/tr>\n<tr>\n<td>Lengthen engagement to 10 mm<\/td>\n<td>More thread to carry load<\/td>\n<td>Deeper boss, longer screw<\/td>\n<\/tr>\n<tr>\n<td>Lower the driver to 1.2 N.m<\/td>\n<td>Hides the strip, does not fix it<\/td>\n<td>Joint may loosen in service<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<p class=\"tablecap\">Table 3 - Decisions ranked by tool-change cost<\/p>\n<div class=\"myth\"><b>Myth:<\/b> \"A process adjustment will fix it.\" Once a design limit is reached, more tuning only adds cost and variation. Confirm the limit with a measurement, then change the drawing or the specification.<\/div>\n<h2 id=\"define-a-strip-torque-acceptance-test\">Define a strip-torque acceptance test<\/h2>\n<p>Agree acceptance before first article: a strip torque of at least 3.0 N.m, a strip-to-drive ratio above 2.5 at 1.2 N.m seating, measured on 10 bosses per cavity to failure with a calibrated driver.<\/p>\n<div class=\"conv\">\n<p class=\"mod-h\">Not sure whether the fault is in the tool or the process?<\/p>\n<p>Send us the drawing, the process window and a few sample parts. We will tell you which change fixes the fault before you commit to a tool modification.<\/p>\n<p class=\"conv-lbl\">What to send us<\/p>\n<ul class=\"conv-need\">\n<li>Part drawing with the affected dimension<\/li>\n<li>Current process settings<\/li>\n<li>Sample parts from a good and a bad batch<\/li>\n<li>Annual volume<\/li>\n<\/ul>\n<p><a class=\"conv-btn\" href=\"\/injection-molding\/\">Send the part for review<\/a>\n<\/div>\n<h2 id=\"recovery-actions-ranked-by-tool-change-cost\">Recovery actions ranked by tool-change cost<\/h2>\n<p>For a run already assembled, re-torque 10 retained bosses and record the failure mode. A 0.9 N.m strip means the pilot hole needs steel, not a softer driver; re-cut to the 3.4 mm hole and re-qualify.<\/p>\n<div class=\"callout\">Validate one change at a time and keep the measurement record. A supplier discussion backed by data is resolved in days, not weeks.<\/div>\n<div class=\"checklist\">\n<p class=\"mod-h\">Before you release this injection moulding job<\/p>\n<ul>\n<li>Pilot hole diameter of 3.4 mm for the 4.2 mm screw is dimensioned on the drawing<\/li>\n<li>Boss OD of 10.0 mm and a 3.3 mm wall are specified with an OD-to-screw ratio of 2.4<\/li>\n<li>A strip torque of at least 3.0 N.m and a strip-to-drive ratio above 2.5 are agreed<\/li>\n<li>The 1.2 N.m seating torque and a calibrated driver are named in the assembly method<\/li>\n<li>First-article strip torque is reported on 10 bosses per cavity to failure<\/li>\n<\/ul>\n<p class=\"cl-note\">Attach this list to the RFQ. Most moulding faults are decided at the drawing stage.<\/p>\n<\/div>\n<div class=\"faq\">\n<h3>Why does the boss strip below the assembly torque?<\/h3>\n<p>A 3.8 mm pilot hole in an 8.0 mm OD boss leaves only 2.1 mm of wall, so strip torque is 0.9 N.m against a 1.2 N.m seating torque.<\/p>\n<h3>Is the screw or the hole to blame?<\/h3>\n<p>Usually the hole. A 4.2 mm screw in a 3.4 mm hole and 10.0 mm OD holds 3.4 N.m; the same screw strips at 0.9 N.m once the hole is opened.<\/p>\n<h3>What OD-to-screw ratio should we use?<\/h3>\n<p>About 2.4, so a 10.0 mm OD for a 4.2 mm screw, giving a 3.3 mm wall. Below 2.0 the boss lacks hoop strength.<\/p>\n<h3>Can a lower driver setting fix it?<\/h3>\n<p>No. It hides the strip and leaves the joint loose. Set the 1.2 N.m seating torque and require strip torque above 3.0 N.m instead.<\/p>\n<h3>How many bosses should we test?<\/h3>\n<p>Torque 10 bosses per cavity to failure with a calibrated driver, and report strip torque and failure mode, not just pass or fail.<\/p>\n<h3>Who owns a stripped batch?<\/h3>\n<p>Put it in the order. Name the hole, OD, engagement and a 3.0 N.m strip limit so the batch is judged by a torque record.<\/p>\n<\/div>\n<div class=\"cta\">\n<p class=\"cta-h\">Get a mouldable part and a fixed quotation<\/p>\n<p>Send us the part file and the failure history. Our engineers will return a DFM review, a material recommendation and a fixed quotation with a defined first-article acceptance test.<\/p>\n<p class=\"cta-lbl\">To get an accurate quote, send:<\/p>\n<ul class=\"cta-need\">\n<li>3D file or 2D part drawing<\/li>\n<li>Resin grade and any regrind limit<\/li>\n<li>Annual volume and target unit price<\/li>\n<li>The failed sample or defect photos<\/li>\n<\/ul>\n<p><a class=\"btn\" href=\"\/injection-molding\/\">Request a DFM review and quote<\/a><br \/>\n<!-- upl-conv-v1 contact --><\/p>\n<div class=\"contactbar\">\n<p class=\"contactbar-h\">Prefer to talk it through first?<\/p>\n<p>Email <a href=\"mailto:john@uplastech.com\">john@uplastech.com<\/a> or message us on <a href=\"https:\/\/wa.me\/8617717529949\">WhatsApp +86 177 1752 9949<\/a>. Send a drawing, a sample or a specification and an engineer will reply.<\/p>\n<\/div>\n<p><!-- upl-conv-v1 trust --><\/p>\n<div class=\"trust\">\n<p class=\"trust-h\">Why buyers work with Uplastech<\/p>\n<p>ISO 9001, ISO 14001 and ISO 45001 certified. Founded in 2016, with injection moulding lines in Shanghai and an extrusion plant in Jiangsu. Moulding machines from 90T to 1100T and a maximum shot weight of 5100 g. Samples and a written quotation are available on request.<\/p>\n<\/div>\n<\/div>\n<div class=\"rel\">\n<h4>Continue reading<\/h4>\n<ul>\n<li><a href=\"https:\/\/uplastech.com\/injection-molding-tolerances\/\">Injection molding tolerances: what to specify<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/snap-fit-design\/\">Snap-fit design: strain, deflection and retention<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/plastic-part-assembly-design\/\">Plastic part assembly design<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/dfm-review-checklist\/\">DFM review checklist<\/a><\/li>\n<li><a href=\"https:\/\/uplastech.com\/injection-molding-material-selection\/\">Injection molding material selection<\/a><\/li>\n<\/ul>\n<p><!-- upl-conv-v1 service --><\/p>\n<p class=\"rel-svc\">Ready to specify? See our <a href=\"https:\/\/uplastech.com\/injection-molding\/\">injection moulding services<\/a> or <a href=\"mailto:john@uplastech.com\">request a written quotation<\/a>.<\/p>\n<\/div>\n<\/div>\n<p><script type=\"application\/ld+json\">{\"@context\": \"https:\/\/schema.org\", \"@type\": \"FAQPage\", \"mainEntity\": [{\"@type\": \"Question\", \"name\": \"Why does the boss strip below the assembly torque?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"A 3.8 mm pilot hole in an 8.0 mm OD boss leaves only 2.1 mm of wall, so strip torque is 0.9 N.m against a 1.2 N.m seating torque.\"}}, {\"@type\": \"Question\", \"name\": \"Is the screw or the hole to blame?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Usually the hole. A 4.2 mm screw in a 3.4 mm hole and 10.0 mm OD holds 3.4 N.m; the same screw strips at 0.9 N.m once the hole is opened.\"}}, {\"@type\": \"Question\", \"name\": \"What OD-to-screw ratio should we use?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"About 2.4, so a 10.0 mm OD for a 4.2 mm screw, giving a 3.3 mm wall. Below 2.0 the boss lacks hoop strength.\"}}, {\"@type\": \"Question\", \"name\": \"Can a lower driver setting fix it?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"No. It hides the strip and leaves the joint loose. Set the 1.2 N.m seating torque and require strip torque above 3.0 N.m instead.\"}}, {\"@type\": \"Question\", \"name\": \"How many bosses should we test?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Torque 10 bosses per cavity to failure with a calibrated driver, and report strip torque and failure mode, not just pass or fail.\"}}, {\"@type\": \"Question\", \"name\": \"Who owns a stripped batch?\", \"acceptedAnswer\": {\"@type\": \"Answer\", \"text\": \"Put it in the order. Name the hole, OD, engagement and a 3.0 N.m strip limit so the batch is judged by a torque record.\"}}]}<\/script><\/p>\n","protected":false},"excerpt":{"rendered":"<p>This guide links boss geometry to strip torque, gives the OD\/ID and pilot-hole figures for the drawing, and sets a strip-to-drive torque acceptance test before first article.<\/p>","protected":false},"author":1,"featured_media":9344,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[35],"tags":[],"class_list":["post-9346","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-injection-molding"],"meta_box":{"post-to-quiz_to":[]},"_links":{"self":[{"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/posts\/9346","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/comments?post=9346"}],"version-history":[{"count":1,"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/posts\/9346\/revisions"}],"predecessor-version":[{"id":9922,"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/posts\/9346\/revisions\/9922"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/media\/9344"}],"wp:attachment":[{"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/media?parent=9346"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/categories?post=9346"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/uplastech.com\/fr\/wp-json\/wp\/v2\/tags?post=9346"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}