
The problem
Symptom. A printed sheet moves from revision C to D, but three reels of the old artwork remain at the former and no one has marked which pallets belong to which version.
What it costs. Without a freeze date and a burn-down plan, old and new cartons mix on the filling line and the buyer faces a relabel or a write-off of the leftover reels.
This article sets out the version-freeze date, the old-stock burn-down, the segregation labels and the named switch lot to write into a change-control note.
Why an artwork revision is a stock problem
Three reels of revision C at 620 kg each leave 1,860 kg of old printed sheet, which at 620 kg a week takes three weeks to consume before revision D can start.
| What the switch shows | Gap behind it | First record to check |
|---|---|---|
| Three C reels still on site | No freeze date set | 21-day freeze note |
| Old and new cartons mixed | No segregation labels | Dated quarantine tags |
| Switch lot undefined | No named reel number | Named D reel and pallet |
| Colour off on first D parts | No print first-article | 2.0 delta E sign-off sample |
Table 1 - Reading an artwork-freeze gap before the switch lot
Need a fixed price for this formed tray?
Send the tray drawing, sheet gauge and annual volume. We will review draft, trim and material, then quote a production tool with a written line-acceptance test.
Get a thermoforming quotationEmail [email protected]WhatsApp
Setting a freeze date against the old reels
Set a freeze 21 days before the switch, bar any new C reels after that date, and burn down the 1,860 kg on a first-in, first-out call-off against one named product code.
A five-step diagnostic sequence
- Count the old reels.
Log three revision C reels at 620 kg each, 1,860 kg in total. - Set the freeze.
Bar any new C reel 21 days before the switch and issue a dated note. - Burn down FIFO.
Draw the 1,860 kg at 620 kg a week and reconcile the balance weekly. - Segregate and gate.
Tag old pallets, rack C and D apart, and sign a 2.0 delta E first-article. - Name the switch.
Release revision D only at one named reel and pallet number.
The chart below is a typical result from that measurement step. Use it to separate a design limit from a setting that can still be recovered.

Burning down leftover printed stock cleanly
Allow an assumed 120 kg switch write-off, with colour held to a 2.0 delta E limit. The figures are illustrative worked values from the stated assumptions, not a market survey, a quoted price or a measured colour series.
| Parameter | Assumed value | What goes wrong outside it |
|---|---|---|
| Freeze date | 21 days before switch | New C reels keep arriving |
| Old stock | 1,860 kg, 3 reels, 3 weeks | Old version ships unannounced |
| Write-off cap | 120 kg, assumed | Unbounded scrap at the switch |
| Colour gate | 2.0 delta E, signed FAI | Off-colour print released |
Table 2 - Artwork parameters for the change-control note
Segregating versions with a clear label
Mark every old-version pallet with a dated quarantine tag, keep C and D reels in separate racks, and release D only at a named reel and pallet number.
| Aktion | What it fixes | Cost or trade-off |
|---|---|---|
| Freeze C 21 days ahead | Stops new old reels | Low: a dated note |
| Burn down 1,860 kg FIFO | Clears old stock | Low: a weekly reconcile |
| Tag and rack versions apart | Stops a mixed pallet | Low: quarantine labels |
| Write off up to 120 kg | Caps the change cost | Medium: an assumed cap |
Table 3 - Version controls ranked by effort and risk
Releasing the new version at one switch lot
Transition by issuing a revision-freeze note, reconciling the 1,860 kg burn-down weekly, and holding a signed first-article of the D print before the switch lot ships.
Want the tray checked against your line?
Send us the tray drawing and the line conditions. We will flag the geometry and material choices that cause jams, and quote a tool with an acceptance test.
What to send us
- Tray drawing with draft and radii
- Sheet grade and gauge
- Stack depth and line speed
- Drawings of the magazine or denester
Clauses for artwork change control
Bind the 21-day freeze, the 1,860 kg burn-down, the 120 kg write-off cap, the 2.0 delta E gate, quarantine tags and the switch-lot number into the change-control note.
Before you sign off this thermoformed tool
- A 21-day version freeze and a ban on new revision C reels are dated
- The 1,860 kg old-stock burn-down and a weekly reconcile are written down
- Quarantine tags and separate C and D racks are in the store rules
- An assumed 120 kg write-off cap and a 2.0 delta E colour gate are agreed
- One named switch reel and pallet number, with a signed first-article, release D
A tray that looks right in the carton can still stop a filling line. Test the stack, not a single part.
Why freeze an artwork revision?
Three reels of revision C hold 1,860 kg, so a freeze 21 days ahead stops more old stock arriving during the switch.
How long is the burn-down?
At an assumed 620 kg a week, 1,860 kg takes three weeks; a weekly reconcile keeps the balance visible.
How are versions kept apart?
Dated quarantine tags on old pallets, separate racks, and first-in, first-out call-off until the old stock is gone.
What defines the switch point?
One named reel and pallet number for revision D, released only after a signed first-article.
What about colour drift?
A 2.0 delta E limit against a retained sample, with an assumed 120 kg write-off cap for the change.
Is 620 kg a measured usage?
No. It is an assumed weekly draw for one example programme, used to size the burn-down, not a recorded consumption series.
Get a tray that runs on your filling line
Send us the tray drawing or a sample stack. We will review draft, trim and material, then quote a production tool with a measurable line-acceptance test written into it.
To get an accurate quote, send:
- Tray drawing or sample stack
- Sheet material and gauge
- Line speed and denesting method
- Annual volume and target unit price
Request a tool and tray quotation
Prefer to talk it through first?
E-Mail [email protected] or message us on WhatsApp +86 177 1752 9949. Send a drawing, a sample or a specification and an engineer will reply.
Why buyers work with Uplastech
ISO 9001, ISO 14001 and ISO 45001 certified. Founded in 2016, with injection moulding lines in Shanghai and an extrusion plant in Jiangsu. Moulding machines from 90T to 1100T and a maximum shot weight of 5100 g. Samples and a written quotation are available on request.











